Experimental study of the effect of crack distribution on the failure mechanism of sandstone specimens based on inclination angles and number of parallel flaws

Pang, Jiewen

DOI: https://doi.org/10.1007/s40948-024-00776-8

2024-03-21

Geomechanics and Geophysics for Geo-Energy and Geo-Resources

Abstract:Discontinuous joints are prevalent in engineered rock masses and play a significant role in the stability of the rock mass. This study aims to analyze the impact of the inclination angle and number of prefabricated flaws on the crack evolution and failure pattern of sandstone specimens. Uniaxial compression tests, along with acoustic emission technology and digital image technology, were employed to monitor and analyze the effects. The findings indicate that: (1) With the increase in the flaw inclination angle, the damage mode of the specimen transitions from tensile to compressive-shear failure. The localized high-strain region on the surface of the specimen predicts the propagation path for the formation of macroscopic cracks. (2) When the number of prefabricated flaws is small, the flaws mainly expand through tensile wing cracks. As the number of flaws increases, the inner flaw tip does not produce cracks. Instead, the failure of the entire specimen occurs along the direction of the outer flaw's tensile wing crack, with the inner flaw running through it. (3) The winged tensile crack is the first crack to appear in all rock samples, regardless of the flaw initiation angles. Finally, the stress intensity factor at the crack tip under uniaxial compression conditions, without considering the closure effect, was expressed based on fracture mechanics theory. The crack initiation angle was then calculated. The results of the theoretical calculation of the initiation angle were found to be consistent with the test results. These research findings can serve as theoretical references and provide insights into the failure mechanisms of cracked rocks and the development of disaster control methods in rock engineering.

energy & fuels,geosciences, multidisciplinary,engineering, geological

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the influence of crack distribution on the failure mechanism of sandstone samples, especially the influence of crack inclination and the number of pre - made fractures on the crack evolution and failure mode of sandstone samples under uniaxial compression conditions. Specifically, the research explores the following problems through experiments:

1. **Influence of crack inclination**:
- How does the failure mode of the sample change from tensile failure to compressive - shear failure as the crack inclination increases?
- How does the crack inclination affect the high - strain area on the sample surface, and then predict the formation path of macroscopic cracks?

2. **Influence of the number of pre - made fractures**:
- When the number of pre - made fractures is small, the fractures mainly expand through tensile wing cracks; as the number of fractures increases, cracks no longer occur at the inner fracture tips, but overall failure occurs in the direction of the tensile wing cracks of the outer fractures.
- How does the number of pre - made fractures affect the final bearing capacity and failure mode of the sample, especially under lower compressive stress?

3. **Theoretical calculation of crack initiation angle**:
- Based on fracture mechanics theory, without considering the closure effect, the expression of the stress intensity factor at the crack tip under uniaxial compression conditions is derived, and the crack initiation angle is calculated.
- Verification of the consistency between theoretical calculation results and experimental results.

4. **Comprehensive analysis of crack propagation and failure mechanism**:
- Monitor and analyze the crack propagation process through acoustic emission technology and digital image technology, and reveal the specific influence of different crack parameters on the failure mode of sandstone samples.

The research on these problems is of great significance for understanding the failure mechanism of fractured rocks and developing effective rock mass engineering disaster control methods. The research conclusions can be applied in fields such as blasting, hydraulic fracturing and rock slope stability.