Abstract:This paper describes the use of an electric drive as an acoustic actuator for active noise cancellation (ANC). In the presented application, the idea is to improve the noise, vibration, harshness (NVH) characteristics of passenger cars without using additional active or passive damper systems. Many of the already existing electric drives in cars are equipped with the required hardware components to generate noise and vibration, which can be used as compensation signals in an ANC application. To demonstrate the applicability of the idea, the electrical power steering (EPS) motor is stimulated with a control signal, generated by an adaptive feedforward controller, to reduce harmonic disturbances at the driver's ears. As it turns out, the EPS system generates higher harmonics of the harmonic compensation signal due to nonlinearities in the acoustic transfer path using a harmonic excitation signal. The higher harmonics impair an improvement in the subjective hearing experience, although the airborne noise level of the harmonic disturbance signal can be clearly reduced at the driver's ears. Therefore, two methods are presented to reduce the amplitude of the higher harmonics. The first method is to limit the filter weights of the algorithm to reduce the amplitude of the harmonic compensation signal. The filter amplitude limitation also leads to a lower amplitude of the higher harmonics, generated by the permanent magnet synchronous machine (PMSM). The second method uses a parallel structure of adaptive filters to actively reduce the amplitude of the higher harmonics. Finally, the effectiveness of the proposed ANC system is demonstrated in two real driving situations, where in one case a synthetic noise/vibration induced by a shaker on the front axle carrier is considered to be the disturbance, and in the other case, the disturbance is a harmonic vibration generated by the combustion engine. In both cases, the subjective hearing experience of the driver could be clearly improved using the EPS motor as ANC actuator.

Active noise control by means of high frequency injection in electric motors

Generalized High-Frequency Injection Framework for Sensorless Control of Synchronous Reluctance Machines

Improved High Frequency Signal Injection Method Based on Fundamental Current Extraction for Permanent Magnetic Synchronous Motors

Rotor field oriented control strategy of multiphase induction motor

Active Vibration Control via Current Injection in Electric Motors

Rotating High-Frequency Voltage Injection Based on Characteristic Harmonic Elimination

Pulse-Width Modulation Technique With Harmonic Injection in the Modulating Wave and Discontinuous Frequency Modulation for the Carrier Wave for Multilevel Inverters: An Application to the Reduction of Acoustic Noise in Induction Motors

Application of High Frequency Signal Injection Method in Motor Control Using Kalman Filter for Signal Processing

Feasibility Analysis for Active Noise Cancellation Using the Electrical Power Steering Motor

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Comparison of Electromagnetic Vibration and Noise of Sensorless Control with Pulsating Voltage Injection

Improved pulsating high-frequency voltage injection with characteristic harmonic elimination

Analysis of Noise Source in Ultrasonic Motor Based on HHT

Sensorless Control Strategy for IPMSM to Reduce Audible Noise by Variable Frequency Current Injection

Active and Passive Helicopter Noise Reduction Using the AVINOR/HELINOIR Code Suite

Low-Frequency Pulse Voltage Injection Scheme-Based Sensorless Control of IPMSM Drives for Audible Noise Reduction

Sensorless Control of IPMSM in Zero- and Low-Speed Regions Using Dual Random High-Frequency Square-Wave Voltage Injection to Reduce Audible Noise

Sideband Electromagnetic Vibrations in Interior PMSM with High Frequency Pulsating Injection Sensorless Control

Hybrid Pseudorandom Signal Injection for Position Sensorless SynRM Drives With Acoustic Noise Reduction

Current Harmonics Controller for Reduction of Acoustic Noise, Vibrations and Torque Ripple Caused by Cogging Torque in PM Motors under FOC Operation