Abstract:Torque ripple reduction by harmonic current injection for permanent magnet synchronous machine (PMSM) drives has been widely investigated. The existing research can be briefly divided into feedforward-based methods and feedback-based methods. Feedforward-based methods require torque ripple model and machine parameters, so that the performance of those methods is limited due to the accuracy of the model itself and machine parameters. Feedback-based-methods are presented to improve the performance of torque ripple reduction, which are mostly based on speed harmonics caused by the corresponding torque ripples, while the speed operation range of feedback-based-methods is limited due to the fact that speed harmonics will be filtered by the inertia of the drive systems at high speeds. Therefore, it is required to propose one torque ripple reduction method without machine parameters, which also avoids the limitation of the speed operation. In this paper, a novel feedback-based torque ripple reduction method for PMSM drives is proposed, wherein quadrature magnitudes of tangential vibration acceleration of the stator are measured and regulated by the model-free adaptive controller (MFAC) for torque ripple reduction, since the tangential force that generates torque ripples will also act on the stator and generate tangential vibration. The proposed controller can generate optimal harmonic current references without speed limitations and any machine parameters. The proposed method is evaluated by experiments and is verified to reduce torque ripples of PMSM drives effectively.

Current Harmonics Controller for Reduction of Acoustic Noise, Vibrations and Torque Ripple Caused by Cogging Torque in PM Motors under FOC Operation

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Rotor Field Oriented Control Strategy with Harmonic Currents Closed-Loop Control for Five-Phase Induction Motor

Rotor field oriented control strategy of multiphase induction motor

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Techniques to restrain harmonics of dual three-phase permanent magnet synchronous motor

Torque Ripple Reduction Method for Permanent Magnet Synchronous Machine Drives With Novel Harmonic Current Control

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Deadbeat Harmonic Current Control of Permanent Magnet Synchronous Machine Drives for Torque Ripple Reduction

Torque Ripple Reduction of Permanent Magnet Synchronous Machine Drives with Tangential Vibration Acceleration Control

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

Novel Virtual-Finite-Control-Set-Based Model Predictive Torque Control of Five-Phase PMSM With Enhanced Third Harmonic Current Suppression

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Complex Coefficient Active Disturbance Rejection Controller for Current Harmonics Suppression of IPMSM Drives

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

A permanent magnet synchronous motor current suppression method based on resonant controllers

An Improving Hysteresis Current Control Method Based on FOC Technique for Induction Motor Drive