Abstract:The geometry of fan-shaped pollution on the surface of an insulator accounts for two different values of Salt Deposit Density (SDD), conductivity, and resistance on the leeward and windward sides of the insulator. This paper proposes a novel dynamic theory model of AC flashover based on equivalent resistance in the presence of a fan-shaped pollution layer. The proposed model can calculate flashover parameters for different values of the fan-shaped pollution density degree (T) and extension degree (J) considering instantaneous variables in arc progression. In this model, the arc current is formulated using the arc equivalent circuit for a constant arc voltage in terms of arc length propagation. Also, the Form Factor (F) is defined as a function of the arc length by sampling from the desired insulator and curve fitting. To validate the analytical model, some experiments are performed on an insulator unit of suspension porcelain by applying artificial pollution at three levels: light, medium, and heavy. Test results show that the critical flashover voltage (CFO) is reduced by 19% by varying J from 1 (uniform pollution) to 1/15. Moreover, by varying T from 10% to 30%, the CFO decreases by 9%. As the non-uniformity degree increases, the correction factor varies in the range of 0.798 ~ 0.938.The proposed modeling of flashover provided by the paper could be used to perform a dimensioning method on insulators under fan-shaped pollution conditions. Also, the proposed model can be included in the EMTP-type platforms to determine the minimum insulator flashover characteristic that will provide an adequate flashover performance under pollution conditions.

Adaptive Neuro-Fuzzy Inference System Application of Flashover Voltage of High-Voltage Polluted Insulator

Present Status and Future Prospects for Flashover Research of Contaminated Insulators

A new approach for the flashover voltage prediction using an arc propagation reproduction on a high-voltage insulator

Prediction of Pollution Flashovervoltage Based on Multiple Characteristics of Leakage Current

Intelligent prediction of 110kV insulator lightning flashover criteria based on random forest

Prediction of Pollution Flashover Voltage Based on Leakage Current under AC Operating Voltage

Impact of atmospheric conditions on the flash-over voltage of the transmission line insulators using central composite design

Performance analysis of high voltage disc insulators with different profiles in clean and polluted environments using flashover, withstand voltage tests and finite element analysis

Risk assessment of contaminated composite insulators in pre-flashover conditions

Development of Contamination Flashover Pre-Warning System and Analysis of Operating Experience

Application of Artificial Neural Network in the Pollution Prediction on Surface of Insulator

Calculation of DC and AC Flashover Voltage of Polluted Insulators

AC flashover dynamic model suggestion and insulation level selection under fan-shaped pollution

An Improved Dynamic Multi-Arcs Modeling Approach for Pollution Flashover of Silicone Rubber Insulator

Flashover Characteristics of Post Insulators Under Fog and Haze Conditions

Pollution Flashover Voltage of Transmission Line Insulators: Systematic Review of Experimental Works

Research on the prediction method of porcelain insulator pollution degree based on electric field monitoring

Flashover Voltage Forecasting Mode of Iced Insulator Based on RBF Network

Investigation on Surface Electric Field Distribution Features Related to Insulator Flashover in SF 6 Gas

Experimental techniques to simulate naturally polluted high voltage transmission line insulators

An experimental study of the flashover performances of outdoor high-voltage polymeric insulators under fan-shaped pollution and dry band location