Abstract:This study aims to investigate the tensile failure behaviours and corresponding fracture mechanisms of basalt fiber reinforced lightweight-aggregate concrete (BFLAC) at various temperatures via a comprehensive cryogenic tests and mesoscale simulations, with a special focus on the quantitative effects of cryogenic temperature and fiber volume fraction. Firstly, Macro- and micro-scale split-tensile tests of BFLAC with fiber volume fractions of 0.0-0.3 % at 20 similar to-90 degree celsius were conducted. Secondly, a two-steps sequentially thermo-mechanical coupled mesoscale analysis approach with explicit modelling of fibers and pore ice was developed to simulate the corresponding direct-tensile failures of BFLAC with more fiber volume fractions. The results show that as the temperature falls from 20 degree celsius to -90 degree celsius, the dominant action mechanism of basalt fibers changes from Mode-1 (pullout of fibers) to Mode-2 (rupture of fibers) due to the ice formation and the interactions between mesocomponents. Tensile strengths of BFLAC present a significant low-temperature enhancing effect, with a maximum increase of 90 % for direct-tensile strength while 104 % for split-tensile strength. Besides, as the temperature drops, although a larger proportion of fibers are in a low bridging stress state and a smaller proportion reach yield stress for rupture, the average fiber stress increases and the utilization degree of fibers with more stresses transferred improves, which results in that the fiber reinforcement effect is strengthened. Finally, based on experimental and numerical results, the quantitative relationships between split-tensile and directtensile strengths at different cryogenic temperatures were given. The present research results can better understand the cryogenic mechanical properties of BFLAC, which have important reference value for its extensive promotions and applications in engineering structures exposed to extreme low-temperature environments.

Effects of cryogenic cooling on the spectral luminescence of BACs in bismuth-doped aluminosilicate fiber

Dielectric Relaxation and Strain Behavior of 95.5% Pb(Zn1/3Nb2/3)O3–4.5% PbTiO3 Single Crystals at Cryogenic Temperatures

Unusual Anti-Thermal Degradation of Bismuth NIR Luminescence in Bismuth Doped Lithium Tantalum Silicate Laser Glasses

Influence of Melting Temperature on the Luminescence Properties of Bismuth-doped Barium Aluminosilicate Glasses

Thermally aggravated photo-bleaching of BAC-Al in bismuth/erbium co-doped optical fiber

Cooling rate effects on luminescence and structure properties of the 5CB liquid crystal, doped by different nanoparticle dispersions

Bismuth-doped zinc aluminosilicate glasses and glass-ceramics with ultra-broadband infrared luminescence

Luminescence properties of nickel and bismuth co-doped barium aluminosilicate glasses

Cold Brownian motion in aqueous media via anti-Stokes photoluminescence

Mechanism Analysis on Tensile Fracture Properties of Heterogeneous BFLAC at Cryogenic Temperature: Experimental Investigation and Mesoscale Simulation

Cryogenic Thermoelectric Enhancements in SbCl3-doped Porous Bi0.85Sb0.15 Alloys

Homogeneity of Bismuth-Distribution in Bismuth-Doped Alkali Germanate Laser Glasses Towards Superbroad Fiber Amplifiers.

Effect of Various Alkaline-Earth Metal Oxides on the Broadband Infrared Luminescence from Bismuth-Doped Silicate Glasses

The cryogenic mechanical properties of translucent alumina

Thermal Degradation of Ultrabroad Bismuth NIR Luminescence in Bismuth-Doped Tantalum Germanate Laser Glasses.

Investigation on the Spectral Characteristics of Bismuth Doped Silica Fibers

Cryogenic thermoelectric enhancements in SbCl 3 -doped porous Bi 0.85 Sb 0.15 alloys

Optical cooling of a Yb-doped alumino-phosphosilicate fiber in air by -250 mK

Stable Broadband Fiber-Coupled Near Infrared Light Sources Based on a Bismuth Heavily Doped Aluminosilicate Optical Fiber

Mixed Alkali Effects in Er3+‐doped Borate Glasses: Influence on Physical, Mechanical, and Photoluminescence Properties

The cryogenic mechanical property deviation of Ti-based bulk metallic glass composite induced by interstitial element