Abstract:There is an increasing need for lightweight structures in the transportation industry, and within these lightweight structures occupant safety is continually important to all stakeholders. Standard single and multi-material topology optimization (MMTO) techniques are effective for designing lightweight structures subjected to linear objectives and constraints but cannot consider crashworthiness. Crashworthiness must be evaluated using explicit dynamic simulation techniques, as a crash event contains geometric and material nonlinearities which cannot be captured by linear static finite element simulations. Explicit dynamic simulations prevent the calculation of sensitivity derivatives required for conventional gradient-based structural optimization strategies. This paper describes a design tool for multi-material topology optimization considering crashworthiness using the equivalent static load (ESL) method. The ESL method is used to generate linear static sub-problems which replicate the dynamic structural response of explicit dynamic crash simulations in the linear regime. The ESL sub-problems are input to a standard MMTO, optimized results from which are used as input for subsequent crash analyses to update the ESLs for additional sub-problems. The ESLs evolve as the design changes – convergence occurs when the design does not change significantly between subsequent sub-problem optimizations. The objective of this paper is to demonstrate a methodology for an efficient design tool for MMTO considering crashworthiness. Firstly, the ESL and competing methods for crashworthiness optimization are introduced and compared. Next a discussion of the tool’s operation flow as well as the sensitivity equations are presented along with two academic examples demonstrating its implementation. The design tool generates optimized multi-material designs which outperform single-material optimized designs in terms of mass by 7.5% and 17.6% in 2D and 3D models respectively when subjected to crash load cases.

Axial crashworthiness and multi-objective optimization of single-hat beams with sinusoidal cross-sections

Axial crashworthiness design of double-hat beams with various cross-sections

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Optimization Design of Longitudinal Beam Structure in Car Frontal Crash

Crashworthiness Analysis and Multiobjective Optimization of Bio-Inspired Sandwich Structure under Impact Load

On the bending force response of thin-walled beams under transverse loading

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Body Structure Optimization of a Car in the Frontal Crash

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Hierarchical double-hat beam for axial crashworthiness

Multi-objective crashworthiness optimization for a newly developed 3D re-entrant auxetic structure using response surface method and MOPSO algorithm

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Crashworthiness Analysis and Multi-Objective Optimization for Concave I-Shaped Honeycomb Structure

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Multi-Material Topology Optimization Considering Crashworthiness

Vehicle safety optimization design under double standards

Crashworthiness analysis and multi-objective optimization of a commercial vehicle frame: A mixed meta-modeling-based method

Crashworthiness analysis and multi-objective optimization for honeycomb structures under oblique impact loading

A machine learning-based crashworthiness optimization for a novel pine cone-inspired multi-cell tubes under bending

Crashworthiness Analysis and Bionic Design of Multi-Cell Tubes under Axial and Oblique Impact Loads