Crashworthiness analysis and multi-objective optimization of a commercial vehicle frame: A mixed meta-modeling-based method

Tao Wang,Liangmo Wang,Chenzhi Wang,Xiaojun Zou

DOI: https://doi.org/10.1177/1687814018778480

IF: 2.1

2018-05-01

Advances in Mechanical Engineering

Abstract:In this study, a mixed meta-modeling-based optimization method has been proposed and applied to a commercial vehicle for crashworthiness design subjected to the frontal crash. A full-scale finite element model of the commercial vehicle has been built and validated by a crash test. The front frame parts have been separated to build a sub-model for crashworthiness optimization. Sensitivity analysis has been performed to find the design factors contributing most to crash performance by using design of experiments. With the reduced dimensions of design space, meta-models of crashworthiness criteria (i.e. specific energy absorption, peak crush force, and peak crush acceleration) have been built by using polynomial response surface and radial basis function networks, respectively. The meta-models with higher global fidelity in design space have been adopted to formulate the multi-objective optimization problem of crashworthiness design, which has then been solved by using Non-dominated Sorting Genetic Algorithm-II. The obtained Pareto front has been discussed and validated with that achieved by Strength Pareto Evolutionary Algorithm 2. The normalized optimal solution from the Pareto front has resulted in 11.15% increase in specific energy absorption and 13.2% decrease in peak crush force for the frame and has led to an obvious improvement in occupant protection and energy absorption for the whole vehicle, verifying that the proposed method is effective for vehicle crashworthiness optimization.

engineering, mechanical,thermodynamics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the crashworthiness design of vehicles in the frontal collision of commercial vehicles. Specifically, the research objective is to simultaneously maximize the specific energy absorption (SEA) and minimize the peak crush force (PCF) through optimized design, without increasing the peak crush acceleration (PCA) too much. These problems are crucial for ensuring passenger safety and reducing collision costs. Since actual vehicle crash tests are both expensive and time - consuming, the research adopts the finite element analysis (FEA) method for numerical simulation to replace real crash tests, and utilizes the hybrid meta - model technique for multi - objective optimization, so as to find effective design schemes for improving vehicle crashworthiness.