Abstract:Experimental observations and numerical results for bending responses of the double hat‐section Al‐CFRP beams Nowadays, hybrid structures, which combine low‐density composites with low‐cost thin‐walled metals, have shown great effect in enhancing the performance of automotive body structures, especially the energy absorber components. This study focuses on the experimental and numerical investigation of the bending energy absorption behavior of CFRP/aluminum hybrid double hat‐section beams used in the side part of the car body. In the experimental section, two types of double hat‐section beams were fabricated: aluminum and Al/CFRP. These beams were then subjected to quasi‐static three‐point bending tests. The results demonstrated that the hybrid beam exhibited superior energy absorption capabilities compared to the single beam. Subsequently, a finite element model was developed using LS‐Dyna software and was validated by comparing the experimental and numerical load–displacement results. In‐depth numerical analyses were conducted to investigate the influence of various design parameters, including CFRP‐reinforcement configuration, numbers of CFRP layers, CFRP ply‐angle, CFRP reinforced length, and aluminum/CFRP mass, on crashworthiness indicators. The numerical findings indicate that the hybrid beam with 04 , 45/−45s ply‐angles exhibited better crash force efficiency (CFE) and specific energy absorption (SEA) compared to other ply‐angles, respectively. Furthermore, increasing the number of CFRP layers within the total beam's mass improved its energy absorption capacity. It was also revealed that the CFRP length on the upper and lower hats could be considered as 42.5% of the total aluminum beam length, as opposed to the full CFRP length, providing enhanced energy absorption capabilities. Highlights Bending behavior of the Al and Al/CFRP double hat section beams. Effects of variable thickness and identical mass on the double hat section beam. Effects of variable ply angle and number of CFRP layers on the hybrid beams. Discrete effect of CFRP reinforcement configurations and inner CFRP lengths.

Axial crashworthiness design of double-hat beams with various cross-sections

Axial crashworthiness and multi-objective optimization of single-hat beams with sinusoidal cross-sections

Hierarchical double-hat beam for axial crashworthiness

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Axial Crushing and Energy Absorption Integrated Design of Modular Filled Double-Hat Beam Composite Structures

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Design of hierarchical multi-cell double circular tubes thin-walled structures for energy absorption

Experimental and numerical investigation on the crashworthiness performance of double hat‐section Al‐CFRP beam subjected to quasi‐static bending test

Crashworthiness Analysis and Multiobjective Optimization of Bio-Inspired Sandwich Structure under Impact Load

Design and Optimization of an Energy-Absorbing Thin-Walled Structure

On the crashworthiness of bio-inspired hexagonal prismatic tubes under axial compression

On the bending force response of thin-walled beams under transverse loading

Crashworthiness analysis and optimisation of a multi-level bionic multi-cell tube under axial dynamic impact

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Crashworthiness performance of square, pentagonal, and hexagonal thin-walled structures with a new sectional design

Crashworthiness design and multi-objective optimization of a novel auxetic hierarchical honeycomb crash box

Crashworthiness Analysis and Bionic Design of Multi-Cell Tubes under Axial and Oblique Impact Loads

Crashworthiness Behavior of Reinforced Circular Tubes under Lateral Load Impact

Comparative Analysis of Out-of-Plane Deformation Mechanisms of Vertex-Based Hierarchical Structures for Crashworthiness