Abstract:Some achievements have been made in the study on mechanical properties of antler, but they have not been applied in engineering practice, especially in the study of thin-walled tubes similar to antler crashworthiness. In order to improve the crashworthiness and energy absorption of the thin-walled tube structures, a bionic thin-walled tube with the same inner diameter and equal gradient of outer diameter was designed based on the structural characteristics of antler bone and the principle of structural bionics. The finite element method was used to simulate the energy absorption characteristics of 75 kinds of bionic thin-walled tube structures under the oblique impacts with the impact angles of 10°, 20° and 30°. The polynomial regression element model and multi-objective particle swarm optimization algorithm were used to optimize, and the Pareto front optimization principle was used to obtain the optimal allocation scheme of each target. The minimum distance selection method was used in optimization analysis to obtain the optimal structural design parameters of each scheme. The optimization method used in this study can provide reference for the follow-up research on the crashworthiness of thin-walled tubes, and the optimal structure of bionic thin-walled tubes can provide reference for practical engineering application. The results show that when only considering a single impact angle, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient tmax-a is 2.84 mm-0.38 mm, 2.89 mm-0.29 mm, 2.91 mm-0.34 mm, respectively under 10°, 20° and 30° impact angles. Considering various impact angle weight factors and different configuration schemes, the optimal number of biomimetic layers n is 6, and the parameter combination of maximum wall thickness and thickness gradient tmax-a is 2.95 mm-0.28 mm, 2.92 mm-0.30 mm and 2.85 mm-0.33 mm, respectively.

Crashworthiness Analysis and Bionic Design of Multi-Cell Tubes under Axial and Oblique Impact Loads

Crashworthiness analysis and optimisation of a multi-level bionic multi-cell tube under axial dynamic impact

Crashworthiness design of bionic-shell thin-walled tube under axial impact

A machine learning-based crashworthiness optimization for a novel pine cone-inspired multi-cell tubes under bending

Bionic design and multi-objective optimization of thin-walled structures inspired by conchs

Study on the crashworthiness of bio-inspired multi-cell tube under axial impact

Design and Crashworthiness Analysis of Thin-Walled Tubes Based on a Shrimp Chela Structure

Crash resistance analysis and optimization of sponge like thin-walled pipes under multiple working conditions

A Novel Multi-Cell Square Tubal Structure Based on Voronoi Tessellation for Enhanced Crashworthiness

Crashworthiness design and optimization of bamboo-inspired tube with gradient multi-cells

Design and Optimization of Equal Gradient Thin-Walled Tube: Bionic Application of Antler Osteon

Crashworthiness analysis of Dragonfly inspired tubes under multiple load cases

Crashworthiness Analysis and Multiobjective Optimization of Bio-Inspired Sandwich Structure under Impact Load

Multiple Performance Evaluation of Bionic Thin-Walled Structures with Different Cross Sections considering Complex Conditions

Oblique Impact Resistance of a Bionic Thin-Walled Tube Based on Antles Osteon

Energy Absorption Performance of Bionic Multi-cell Tubes Inspired by Shrimp chela

Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing

Numerical Study on a Fractal-Like Multi-Cell Tubes with the Fibonacci Helical Section under Axial Crushing

Multi-Objective Robust Design Optimization for Crashworthiness Enhancement of Hybrid 2D Triaxially Braided Composite Tube Using Evolutionary Algorithms

Numerical simulation and theoretical analysis of the crashworthiness of a tree-like hierarchical multicellular bi-tube

Design and numerical study on bionic columns with grooves under lateral impact