Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Electrical conduction and impedance spectroscopic studies for KNbO3–NaNbO3 high Tc electroceramics with enhanced d33 via BaTiO3 co-doping approach

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Dielectric Performance and Conductive Mechanism of KNN-based Ceramics Prepared Via Sol–gel Core–shell Process

Preparation and Characterization on Piezo-/Ferro-electric Properties Of(1-X)(knn+lt)+xbi Ceramics

Dielectric Properties and Impedance Analysis of K0.5Na0.5NbO3–Ba2NaNb5O15 Ceramics with Good Dielectric Temperature Stability

Enhanced electrical properties in KNN-based ternary ceramics with high Curie temperature

The Impedance, Dielectric and Piezoelectric Properties of Tb4O7 and Tm2O3 Doped KNN Ceramics

Temperature-insensitive KNN-based Ceramics by Elevating O-T Phase Transition Temperature and Crystal Texture

Effect of KNN substitution on the structural, electrical, and piezo characteristics of lead-free 0.94NBT–0.06SrTiO3 ceramics

Temperature Stability and Electrical Properties of Tm2O3 Doped KNN-based Ceramics

Impedance Spectroscopy of (Bi 1/2 Na 1/2 )TiO 3 -BaTiO 3 Ceramics Modified with (K 0.5 Na 0.5 )NbO 3

Temperature Stability and Electrical Properties of MnO‐doped KNN‐based Ceramics Sintered in Reducing Atmosphere

Dielectric, Ferroelectric and Piezoelectric Behaviors of Thulium-Doped KNN Ceramics Fabricated by Microwave Sintering

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

Frequency and Temperature Dependent Dielectric and Conductivity Behavior of 0.95(k0.5na0.5)nbo3–0.05batio3 Ceramic

Phase transitions, relaxor behavior, and electrical properties in (1- x )(Bi 0.5 Na 0.5 )Ti0 3- x (K 0.5 Na 0.5 )NbO 3 lead-free piezoceramics

Enhancing Depolarization Temperature and Thermal Stability of KNN-based Piezoelectric Ceramics Through Li Substitution and Al2O3 Doping

(K0.44,Na0.52,Li0.04)(Nb0.84,Ta0.10,Sb0.06)O3 ferroelectric ceramics

Piezoelectric Properties and Temperature Sensitivity for CaZrO3 Doped KNN-based Ceramics Sintered in Reducing Atmosphere

Phase transitions, relaxor behavior, and electrical properties in (1− x )(Bi 0.5 Na 0.5 )TiO 3 – x (K 0.5 Na 0.5 )NbO 3 lead-free piezoceramics

Design on Improving Piezoelectric Strain and Temperature Stability of KNN‐based Ceramics