Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Spent caustic treatment by electrocoagulation process: effect of electrode shape and spacing

Electrocoagulation process for spent caustic treatment: Optimization, sludge analysis and economic studies

Highly efficient treatment of petrochemical spent caustic effluent via electro-Fenton process for COD and TOC removal: optimization and experimental

Sulfide removal and water recovery from ethylene plant spent caustic by suspension crystallization and its optimization via response surface methodology

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Treatment of highly concentrated tannery wastewater using electrocoagulation: Influence of the quality of aluminium used for the electrode

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Effect of different set of electrodes for degradation of distillery spent wash promoted by electrocoagulation

Optimization of the Acid blue 113 dye degradation in the three-dimensional electro persulfate process (3D/EPS) catalyzed by granular activated carbon (GAC) using the response surface methodology

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Chemical oxygen demand and tannin/lignin removal from paper mill wastewater by electrocoagulation combined with peroxide and hypochlorite treatments

Treatment of wastewater from the washing process of a municipal solid waste collection container by electrochemical treatment using different anode materials: a statistical optimization

Optimizing waste activated sludge disintegration by investigating multiple electrochemical pretreatment conditions: Performance, mechanism and modeling

Study on treatment of paper mill wastewater by electrocoagulation and its sludge analysis

Application of electro oxidation process for treating wastewater from petrochemical with mixed metal oxide electrode

Advanced treatment of cephalosporin pharmaceutical wastewater by nano-coated electrode and perforated electrode.

Impact of different anode materials on electro-Fenton process and tannery wastewater treatment using sequential electro-Fenton and electrocoagulation

Assessment of electrocoagulation for the treatment of petroleum refinery wastewater

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Enhanced chromium removal from tannery wastewater through electrocoagulation with iron electrodes: Leveraging the Box-Behnken design for optimization

Alternative sequential combinations of electrocoagulation with electrooxidation and peroxi-coagulation for effective treatment of adhesive production industry wastewater