Abstract:In this research, the interaction effects between pH (range from 2 to 5), temperature (20–60 °C), current density (5–20 mA/cm2), hydrogen peroxide per chemical oxygen demand H2O2COD\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$ \frac{{{\text{H}}_{2} {\text{O}}_{2} }}{\text{COD}} $$\end{document} (0.2–0.75), and reaction time (45–135 min) for spent caustic wastewater treatment were assessed through electro-photo-Fenton oxidation process by using response surface methodology. The optimum conditions for Esfahan oil refinery’s spent caustic wastewater treatment with an experimental COD removal of 97% were obtained at 4.5 (pH), 60 °C, 16.6 mA/cm2, 0.69 (H2O2COD\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$ \frac{{{\text{H}}_{2} {\text{O}}_{2} }}{\text{COD}} $$\end{document}), and 80 min. The interaction effects of hydrogen peroxide with pH; hydrogen peroxide with temperature; and temperature with reaction time were considered essential, which indicated the dependency among the factors. However, the interaction effect between pH and hydrogen peroxide was found so significant for chemical pollutant removal due to the activity of both iron ions and hydrogen peroxide. The pH reduction step of spent caustic (pH < 5) could lead toward the COD removal of 45% in the form of hydrogen sulfide gas. Complementary tests were run on the precipitated chemical sludge at optimal conditions to find organic contaminants, which indicated the chemical sludge mainly contains FeSO4 and Na2SO4. It was shown that advanced oxidation process for the degradation of contaminants was efficient and pollutants did not add to the sediment in the sludge phase.Graphical abstract

Highly efficient treatment of petrochemical spent caustic effluent via electro-Fenton process for COD and TOC removal: optimization and experimental

Removal of COD and TOC From Petroleum Synthetic Wastewater Containing Cyclic Aromatic Hydrocarbons Using the Photo-Fenton Process by the Box-Behnken Method

Removing sulfide from spent caustic petrochemical wastewater with electro-Fenton treatment

Interaction effects of various reaction parameters on the treatment of sulfidic spent caustic through electro-photo-Fenton

Treatment of a Low-Salt Petrochemical Effluent Using a Slurry Photocatalytic Reactor

Application of electro oxidation process for treating wastewater from petrochemical with mixed metal oxide electrode

Electrocoagulation process for spent caustic treatment: Optimization, sludge analysis and economic studies

Removal of COD from real oily wastewater by electrocoagulation using a new configuration of electrodes

Optimization of electro‐oxidation and electro‐Fenton techniques for the treatment of oilfield produced water

The Taguchi Approach in Studying and Optimizing the Electro-Fenton Oxidation to Reduce Organic Contaminants in Refinery Wastewater Using Novel Electrodes

Spent caustic treatment by electrocoagulation process: effect of electrode shape and spacing

Treatment of Refining Alkaline Residue Wastewater by Micro-electrolysis/Fenton Process

Comparison of Electro-Fenton and Photoelectro-Fenton for removal of Acrylonitrile Butadiene Styrene (ABS) from petrochemical wastewater

Sodium hypochlorite as an alternative to hydrogen peroxide in Fenton process for industrial scale

Efficient degradation of refractory pollutant boosted by combining heterogeneous electro-Fenton on the hydrophobic modified gas diffusion electrode with anodic oxidation

Three-dimensional electro-Fenton system with steel-slag based particle electrode for the treatment of refinery spent caustic

Electro-Fenton technology for dairy wastewater treatment

Enhancement of COD Removal from Oilfield Produced Wastewater by Combination of Advanced Oxidation, Adsorption and Ultrafiltration

Combination of Chemical Coagulation and Photo-Fenton Oxidation Process for the Treatment of Beet Sugar Industry Wastewater: Optimization of Process Conditions by Response Surface Methodology

A Fenton-based approach at neutral and un-conditioned pH for recalcitrant COD removal in tannery wastewater: Experimental test and sludge characterization

Improvement of electro-Fenton process by using heterogeneous Fe-MIL-88B nanocatalyst and simultaneous rotation of cathode and anode for dye removal