Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Design of a Canted-Cosine-Theta Orbit Corrector for the High Luminosity LHC

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Definition of tolerances and corrector strengths for the orbit control of the High-Energy Booster ring of the future electro-positron collider

The HL-LHC High Order Correctors Series Production and Powering Tests Status

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Conceptual Design of CEPC Detector Magnet

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Superconducting Magnet with the Reduced Barrel Yoke for the Hadron Future Circular Collider

From Design to Development Phase of the ITER Correction Coils

The first superconducting final focus quadrupole prototype of the FCC-ee study

Energy deposition studies for the High-Luminosity Large Hadron Collider inner triplet magnets

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

Training-free demonstration of a 5.4 T Nb 3 Sn canted-cosine-theta accelerator dipole impregnated with paraffin wax

Optics for Landau damping with minimized octupolar resonances in the LHC

Conceptual designs of dipole magnet for muon collider ring

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Research and development of the high precision low field dipole magnet for CEPC Booster

Design of an arrangement of cubic magnets for a quasi-axisymmetric stellarator experiment

A novel device for the measurement of the mechanical and magnetic axes of superconducting magnet assemblies for accelerators