Abstract:Various superconducting detector solenoids for particle physics have been developed in the world. The key technology is the aluminum-stabilized superconducting conductor for almost all the detector magnets in particle physics experiments. With the progress of the conductor, the coil fabrication technology has progressed as well, such as the inner coil winding technique, indirect cooling, transparent vacuum vessel, quench protection scheme using pure aluminum strips and so on. The detector solenoids design study is in progress for future big projects in Japan and Europe, that is, ILC, FCC and CLIC, based on the technologies established over many years. The combination of good mechanical properties and keeping a high RRR is a key point for the development of Al-stabilized conductor. The present concern for the detector solenoid development is to have been gradually losing the key technologies and experiences, because large-scale detector magnets with Al-stabilized conductor has not been fabricated after the success of CMS and ATLAS-CS in LHC. Complementary efforts are needed to resume an equivalent level of expertise, to extend the effort on research and to develop these technologies and apply them to future detector magnet projects. Especially, further effort is necessary for the industrial technology of Al-stabilized superconductor production. The worldwide collaboration with relevant institutes and industries will be critically important to re-realize and validate the required performances. Some detector solenoids for mid-scale experiment wound with conventional copper-stabilized Nb-Ti conductor require precise control of magnetic field distribution. The development efforts are on-going in terms of the magnetic field design technology with high precision simulation, coil fabrication technology and control method of magnetic field distribution.

Conceptual Design of CEPC Detector Magnet

Comparison of Two Detector Magnetic Systems for the Future Circular Hadron-Hadron Collider

Superconducting Magnet with the Reduced Barrel Yoke for the Hadron Future Circular Collider

Feasibility Study of TPC Tracker Detector for the Circular Collider

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

Design of CEPC superconducting RF system

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Superconducting detector magnets for high energy physics

Design Concept for a Future Super Proton-Proton Collider

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

A Novel Aluminum-Stabilized Stacked REBCO Tape Cable

Design, Development and Fabrication for BESIII Superconducting Muon Detector Solenoid

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Conceptual Design Study of a Large Bore Superconducting Test Facility Magnet, SUCCEX

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Conceptual designs of dipole magnet for muon collider ring

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

CEPC accelerator status overview

Self-protected high-temperature superconducting demonstrator magnet for particle detectors

Study on Normal Bending Characteristics of Aluminium-Stabilized Stacked HTS Tape Cable for CEPC Detector Magnet