Abstract:Cryogenic mirrors have been introduced to the KAGRA gravitational wave telescope in Japan, and are also planned to be used in next-generation gravitational wave telescopes to further improve their sensitivity. Molecular gases inside vacuum chambers adhere to cold mirror surfaces because they lose their kinetic energy when they hit cryogenic surfaces. Finally, a number of adsorbed molecules form an adlayer, which will grow with time. The growing adlayer functions as an optical coating and changes the properties of the underlying mirror, such as reflectance, transmittance, and absorption, which are carefully chosen to maximize the detector sensitivity. The adlayer possibly affects the gravitational wave detector sensitivity. In order to characterize these changes, a high-finesse Fabry--Perot cavity was introduced to a KAGRA cryostat and the finesse of the cavity was monitored for 35 days under cryogenic conditions. We confirmed that the molecular adlayer was formed on a cold mirror and caused an oscillation in the finesse. The real and imaginary parts of the refractive index of the adlayer were $1.26 \pm 0.073$ and $2.2 \times 10^{-7} \pm 1.3 \times 10^{-7} $, respectively. These are considered to be that of $\mathrm{H_2O}$ molecules. The formation rate of the molecular adlayer was 27 $\pm$ 1.9 $\mathrm{nm/day}$. In this paper, we describe theoretical and experimental studies of the formation of a molecular adlayer on cryogenic mirrors. Furthermore, the effects of a molecular adlayer on the quantum noise and the input heat to the test mass are also discussed.

Characterization of birefringence inhomogeneity of KAGRA sapphire mirrors from transmitted wavefront error measurements

Characterisation of birefringence inhomogeneity of KAGRA sapphire mirrors from transmitted wavefront error measurements

Influence of non-uniformity in sapphire substrates for a gravitational wave telescope

Evaluation of heat extraction through sapphire fibers for the GW observatory KAGRA

Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector

Thermal lensing in cryogenic sapphire substrates

Effects of mirror birefringence and its fluctuations to laser interferometric gravitational wave detectors

Measurement of the mechanical loss of a cooled reflective coating for gravitational wave detection

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

Scattering in Sapphire Test Masses for Gravitational Wave Detectors

Molecular adsorbed layer formation on cooled mirrors and its impacts on cryogenic gravitational wave telescopes

Excess noise and photo-induced effects in highly reflective crystalline mirror coatings

Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature

Enabling cryogenic gravitational wave detectors: growth of sapphire crystals with record low absorption in the near infrared

Thermal Noise Reduction and Absorption Optimisation via Multi-Material Coatings

Temperature Dependence of the Mechanical Dissipation of Gallium Bonds for Use in Gravitational Wave Detectors

Vibration analysis of KAGRA cryostat at cryogenic temperature

Interferometer design of the KAGRA gravitational wave detector

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

Measurement of the thermal accommodation coefficient of helium on a crystalline silicon surface at low-temperatures