Abstract:A novel 0.98 μm and 1.15 μm dual-wavelength pumping scheme for cascaded mid-infrared Er-doped ZBLAN fiber laser at 3.44 μm and 2.78 μm is proposed and analyzed by a detailed theoretical model. In our pumping scheme, the 4I13/2 level (the lower level of 2.78 μm laser), which is taken as a virtual ground state, is first populated by 976 nm pump and 2.78 μm transition. The 1150 nm virtual ground state absorption (VGSA), corresponding to 4I13/2→4F9/2 transition, excites the Er ions accumulated in 4I13/2 level to 4F9/2 level (the upper level of 3.44 μm laser), emptying the 4I13/2 level as well as providing positive gain for 3.44 μm laser. Followed by the 3.44 μm laser transition, the Er ions would rapidly decay to 4I11/2 level (the upper level of 2.78 μm laser) via nonradiative transition, realizing the re-population of 4I11/2 level and enhancing the 2.78 μm laser gain. Hence, a cycling of Er ions between 4I13/2 level and 4F9/2 level, which includes both 2.78 μm and 3.44 μm laser transitions, is realized via the 4I13/2→4F9/2 VGSA. An interesting point in our proposed pumping scheme is that both the 2.78 μm and 3.44 μm laser power are dominantly contributed by the VGSA pump, while the main role of 976 nm pump is to provide initial population to sustain the ions cycling. By optimizing the wavelength of VGSA pump, dual-wavelength pump power ratio and laser cavity parameters, the overall optical efficiency of the two laser output power with respect to pump power could be improved to over 55%. This work provides a new insight on the cascaded mid-infrared fiber laser and also a promising pumping scheme for efficient 2.78 μm and 3.44 μm laser generation simultaneously from single Er-doped ZBLAN fiber.

Numerical modeling of multi-point side-pumped mid-infrared erbium-doped fluoride fiber lasers

Modeling Rare-Earth Doped Microfiber Ring Lasers

Numerical Modeling of 3.5 micron Dual-Wavelength Pumped Erbium Doped Mid-Infrared Fiber Lasers

Theoretical Modeling of 4.3 Μm Mid-Infrared Lasing in Dy3+-Doped Chalcogenide Fiber Lasers

Modeling the 3-Micron Class Er-Doped Fluoride Fiber Laser With a Cubic Energy Transfer Rate Dependence

Numerical modeling of an ASE suppression and power scalable approach in 1908?nm LMA-TDFO

Numerical modeling of the self-similar mode-locked Er3+-doped fluoride fiber laser around 3 μm

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Numerical Analysis for Multi-Position-pumped Double-Clad Fiber Lasers

Modeling of A Cascaded Mid-Infrared Fiber Laser at 2.78 μm and 3.44 μm Dual-Wavelength Pumped at 0.98 μm and 1.15 μm

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Numerical Analysis of Temperature Distributions in Yb-Doped Double-Clad Fiber Lasers with Consideration of Radiative Heat Transfer

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

Novel constant-cladding tapered-core ytterbium-doped fiber for high-power fiber laser oscillator

Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Comparison of End-Pumped and Multi-Point Pumped Yb3+-doped Gain Guided and Index Antiguided Fiber Laser