Abstract:A novel 0.98 μm and 1.15 μm dual-wavelength pumping scheme for cascaded mid-infrared Er-doped ZBLAN fiber laser at 3.44 μm and 2.78 μm is proposed and analyzed by a detailed theoretical model. In our pumping scheme, the 4I13/2 level (the lower level of 2.78 μm laser), which is taken as a virtual ground state, is first populated by 976 nm pump and 2.78 μm transition. The 1150 nm virtual ground state absorption (VGSA), corresponding to 4I13/2→4F9/2 transition, excites the Er ions accumulated in 4I13/2 level to 4F9/2 level (the upper level of 3.44 μm laser), emptying the 4I13/2 level as well as providing positive gain for 3.44 μm laser. Followed by the 3.44 μm laser transition, the Er ions would rapidly decay to 4I11/2 level (the upper level of 2.78 μm laser) via nonradiative transition, realizing the re-population of 4I11/2 level and enhancing the 2.78 μm laser gain. Hence, a cycling of Er ions between 4I13/2 level and 4F9/2 level, which includes both 2.78 μm and 3.44 μm laser transitions, is realized via the 4I13/2→4F9/2 VGSA. An interesting point in our proposed pumping scheme is that both the 2.78 μm and 3.44 μm laser power are dominantly contributed by the VGSA pump, while the main role of 976 nm pump is to provide initial population to sustain the ions cycling. By optimizing the wavelength of VGSA pump, dual-wavelength pump power ratio and laser cavity parameters, the overall optical efficiency of the two laser output power with respect to pump power could be improved to over 55%. This work provides a new insight on the cascaded mid-infrared fiber laser and also a promising pumping scheme for efficient 2.78 μm and 3.44 μm laser generation simultaneously from single Er-doped ZBLAN fiber.

Numerical Modeling of 3.5 micron Dual-Wavelength Pumped Erbium Doped Mid-Infrared Fiber Lasers

Modeling Rare-Earth Doped Microfiber Ring Lasers

Modeling of a Diode Side Pumped Cesium Vapor Laser MOPA System

A Kinetic Model for Diode Pumped Rubidium Vapor Laser

Modeling of a diode transverse-pumped cesium vapor laser

Numerical modeling of multi-point side-pumped mid-infrared erbium-doped fluoride fiber lasers

Theoretical Modelling of Single-Mode Lasing in Microcavity Lasers Via Optical Interference Injection.

Modeling the 3-Micron Class Er-Doped Fluoride Fiber Laser With a Cubic Energy Transfer Rate Dependence

Modeling of A Cascaded Mid-Infrared Fiber Laser at 2.78 μm and 3.44 μm Dual-Wavelength Pumped at 0.98 μm and 1.15 μm

Simulation analyses and configuration optimizations of an LD pumped 3.1 μm Co/Er:PbF 2 MIR laser

Model and computational advancements to full vectorial Maxwell model for studying fiber amplifiers

Theoretical Modeling of 4.3 Μm Mid-Infrared Lasing in Dy3+-Doped Chalcogenide Fiber Lasers

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Numerical modeling of the self-similar mode-locked Er3+-doped fluoride fiber laser around 3 μm

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

Numerical Analysis for Multi-Position-pumped Double-Clad Fiber Lasers

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

Numerical Modeling Of Transverse Mode Competition In Strongly Pumped Multimode Fiber Lasers And Amplifiers

Numerical Analysis of A Dual-Pass Pumping Laser with Weak Absorption

Modeling and Demonstration of Dual Wavelength All-Fiber Linear Cavity Laser