Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

Numerical modeling of the self-similar mode-locked Er3+-doped fluoride fiber laser around 3 μm

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Numerical Study of a Hybrid Mode-Locked Erbium-Doped Fluoride Fiber Laser at 2.8 Μm

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser

Generation of Sub-60 Fs Similaritons at 1.6 Mu M from an All-Fiber Er-Doped Laser

Four-wave mixing assisted self-stable 4×10 GHz actively mode-locked Erbium fiber ring laser

Wavelength-tunable Passively Mode-Locked Mid-Infrared Er3+-doped ZBLAN Fiber Laser.

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Simple approach to broadband mid-infrared pulse generation with a mode-locked Yb-doped fiber laser

Numerical Simulation and Optimization of 3.5 Μm Erbium-Doped ZrF4 Fiber Laser Pumped at 655 and 1981 Nm

Spatiotemporal mode-locking in a linear-cavity Er:ZBLAN fiber laser

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

Environment-stable sub-100 fs Er: fiber laser with a 3 dB bandwidth of 78 nm

Femtosecond Passively Mode-Locked Er3+-doped Fiber Ring Laser

Ultrafast mid-infrared fiber laser mode-locked using frequency-shifted feedback

Numerical Study of a Bi-Directional In-Band Pumped Dysprosium-Doped Fluoride Fiber Laser at 3.2 Μm

High-energy femtosecond pulse generation from a hybrid mode-locked large-mode-area Er:ZBLAN fiber laser

A 303 MHz Fundamental Repetition Rate Femtosecond Er:fiber Ring Laser

Mode-locked 2.8-Μm Fluoride Fiber Laser: from Soliton to Breathing Pulse

Numerical Investigation on High Power Mid-Infrared Supercontinuum Fiber Lasers Pumped at 3 Μm.