Abstract:We present an Environmental Control System (ECS) designed to achieve milliKelvin (mK) level temperature stability for small-scale astronomical instruments. This ECS is inexpensive and is primarily built from commercially available components. The primary application for our ECS is the high-precision Doppler spectrometer MINERVA-Red, where the thermal variations of the optical components within the instrument represent a major source of systematic error. We demonstrate $\pm 2$ mK temperature stability within a 0.5 m$^{3}$ Thermal Enclosure using resistive heaters in conjunction with a commercially available PID controller and off-the-shelf thermal sensors. The enclosure is maintained above ambient temperature, enabling rapid cooling through heat dissipation into the surrounding environment. We demonstrate peak-to-valley (PV) temperature stability of better than 5 mK within the MINERVA-Red vacuum chamber, which is located inside the Thermal Enclosure, despite large temperature swings in the ambient laboratory environment. During periods of stable laboratory conditions, the PV variations within the vacuum chamber are less than 3 mK. This temperature stability is comparable to the best stability demonstrated for Doppler spectrometers currently achieving 1 m s$^{-1}$ radial velocity precision. We discuss the challenges of using commercially available thermoelectrically cooled CCD cameras in a temperature-stabilized environment, and demonstrate that the effects of variable heat output from the CCD camera body can be mitigated using PID-controlled chilled water systems. The ECS presented here could potentially provide the stable operating environment required for future compact, "astro-photonic" precise radial velocity (PRV) spectrometers to achieve high Doppler measurement precision with a modest budget.

Actuators linearization of a large volume environmental simulation chamber via pulse code modulation

Method for enhancing stability in multi-beam microscopy

A Compact and High-Precision Method for Active Beam Stabilization System

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Control of Temperature Uniformity in the Temperature Chamber with Centrifugal Acceleration

Temperature stabilization of a lab space at 10 mK-level over a day

Temperature stabilization of a lab space at $10\,\mathrm{mK}$-level over a day

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

A Constant Temperature Box for Evaluating the Long-Term Performance of Scientific Instruments

A Low-cost Environmental Control System for Precise Radial Velocity Spectrometers

Optimal Active Control for Fast Response of Temperature Oscillation Suppression in Cryostats

The Development and Nonlinear Adaptive Robust Control of the Air Chamber Pressure Regulation System of a Slurry Pressure Balance Shield Tunneling Machine

Nonlinear Control of Hybrid Electrostrictive/Piezoelectric Polymeric Structures: Theory and Experiment

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Active stabilization of multi-parameter in AMO experiments with a single digital servo

External digital power stabilization system for levitated optomechanics sensor

Long-term Stability Improvement of Opto-Electronic Oscillators Via Laser Driver Current Control

Improving the control performance of frequency stabilized system for transverse Zeeman laser tube

Dynamic PID loop control

Active suppression of temperature oscillation from a pulse-tube cryocooler in a cryogen-free cryostat: Part 1. Simulation modeling from thermal response characteristics

Synthetic FM triplet for AM-free precision laser stabilization and spectroscopy