Abstract:We present an Environmental Control System (ECS) designed to achieve milliKelvin (mK) level temperature stability for small-scale astronomical instruments. This ECS is inexpensive and is primarily built from commercially available components. The primary application for our ECS is the high-precision Doppler spectrometer MINERVA-Red, where the thermal variations of the optical components within the instrument represent a major source of systematic error. We demonstrate $\pm 2$ mK temperature stability within a 0.5 m$^{3}$ Thermal Enclosure using resistive heaters in conjunction with a commercially available PID controller and off-the-shelf thermal sensors. The enclosure is maintained above ambient temperature, enabling rapid cooling through heat dissipation into the surrounding environment. We demonstrate peak-to-valley (PV) temperature stability of better than 5 mK within the MINERVA-Red vacuum chamber, which is located inside the Thermal Enclosure, despite large temperature swings in the ambient laboratory environment. During periods of stable laboratory conditions, the PV variations within the vacuum chamber are less than 3 mK. This temperature stability is comparable to the best stability demonstrated for Doppler spectrometers currently achieving 1 m s$^{-1}$ radial velocity precision. We discuss the challenges of using commercially available thermoelectrically cooled CCD cameras in a temperature-stabilized environment, and demonstrate that the effects of variable heat output from the CCD camera body can be mitigated using PID-controlled chilled water systems. The ECS presented here could potentially provide the stable operating environment required for future compact, "astro-photonic" precise radial velocity (PRV) spectrometers to achieve high Doppler measurement precision with a modest budget.

Temperature stabilization of a lab space at $10\,\mathrm{mK}$-level over a day

Temperature stabilization of a lab space at 10 mK-level over a day

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

A Constant Temperature Box for Evaluating the Long-Term Performance of Scientific Instruments

Radiative Thermal Coats for Passive Temperature Management

A Low-cost Environmental Control System for Precise Radial Velocity Spectrometers

Pico-Kelvin thermometry and temperature stabilization using a resonant optical cavity

Thermal control of long delay lines in a high-resolution astrophotonic spectrograph

Actuators linearization of a large volume environmental simulation chamber via pulse code modulation

Improving the Environmental Temperature Adaptability of an Electric Temperature Measurement Subsystem by Matching Temperature Coefficients of Substitutable Resistors

Performance benchmarking of an ultra-low vibration laboratory to host a commercial millikelvin scanning tunnelling microscope

Temperature measurement and stabilization in a birefringent whispering gallery resonator

Thermally Stable Peltier Controlled Vacuum Chamber for Electrical Transport Measurements

Design and realization of a 3-K cryostat for a 10-cm ultrastable silicon cavity

Thermally compensated common-path differential interferometer with reduced long-term zero-drifts

Stable Temperature Regulation for TES Testing below 200mk Employing Improved Cohen-Coon Method

Integrated Reference Cavity for Dual-mode Optical Thermometry and Frequency Stabilization

Sub-kelvin temperature management in ion traps for optical clocks

Correcting Temperature Dependence in Miniature Spectrometers Used in Cold Polar Environments

Optimal Active Control for Fast Response of Temperature Oscillation Suppression in Cryostats

Resonance frequency measurement with accuracy and stability at the 10-12 level in a copper microwave cavity below 26 K by experimental optimization