Abstract:As we know, 3DPC is printed layer by layer compared with mold-casting conventional concrete. Pore structure and layer-to-layer interface are two main aspects of the internal structure for 3DPC, which decide 3DPC's mechanical performance. The layer-to-layer interface caused by printing is specific to 3DPC. The emphasis of this study lies in the layer-to-layer interfaces of 3DPC. The first aim of this study is to quantify the characteristics of the layer-to-layer interface and therefore characterize different aspects of the interfaces. The second aim of this study is to explore how the internal structure of printed concrete influences the mechanical performance of 3DPC. This research set out to design a series of experimental comparisons between 3DPC and casted concrete with the same compositions. Mechanical tests, i.e., compressive stress, ultrasonic Pulse Velocity test, flexural tension, and tension splitting, as well as the Ultrasonic Pulse Velocity test, were performed to check the mechanical performance of 3DPC. Contrary to what has often been expected, the mechanical test results showed the printed concrete has a quality not worse than casted concrete with the same recipe. Meanwhile, the X-ray computed tomography (X-CT) is used to characterize the internal structure, pore shapes, and interfaces of 3DPC. First, the investigation revealed that the lower total porosity and fewer big voids could be the fundamental causes meaning 3DPC has a better mechanical performance than casted concrete. Second, the statistics based on aspect ratio show that the distribution curves follow similar trends, regardless of the printed or casted concrete. Third, this study quantified the depth of the different interfaces for 3DPC. The results suggest that the porosity in an interface varies in a range. The author's pioneer work has contributed to our present understanding of the interfaces of 3DPC.

Assessing printing synergism in a dual 3D printing system for ultra-high performance concrete in-process reinforced cementitious composite

Investigation of the Internal Structure of Hardened 3D-Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance.

In-process reinforcing method: dual 3D printing procedure for ultra-high performance concrete reinforced cementitious composites

A rheological-based printability assessment method for 3D printing Engineered Cementitious Composites considering fiber dispersion

Rheological characterization of ultra-high performance concrete for 3D printing

Interfacial bonding performance of 3D-printed Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC) and cast normal concrete

Comprehensive investigations on the relationship between the 3D concrete printing failure criterion and properties of fresh-state cementitious materials

Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis

Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete

Inclined 3D concrete printing: build-up prediction and early-age performance optimization

A mechanical characteristic capture method considering printing configurations for buildability modeling in concrete 3D printing

Numerical simulation of the extrusion and layer deposition processes in 3D concrete printing with the Particle Finite Element Method

On-line and in-line quality assessment across all scale levels of 3D concrete printing

Influence of print speed and nozzle diameter on the fiber alignment in 3D printed ultra-high-performance concrete

Modeling concrete deposition via 3D printing using reproducing kernel particle method

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Geometric quality assurance for 3D concrete printing and hybrid construction manufacturing using a standardised test part for benchmarking capability

Triaxial compressive behavior of 3D printed PE fiber-reinforced ultra-high performance concrete

Comparative analysis of structural build-up in one-component stiff and two-component shotcrete-accelerated set-on-demand mixtures for 3D concrete printing

D-optimal design of experiments applied to 3D high-performance concrete printing mix design

Inspecting manufacturing precision of 3D printed concrete parts based on geometric dimensioning and tolerancing