Abstract:Previously we have found that (NbTaZrW)C exhibits a good combination of nanohardness and toughness. In this report, we explore the possibility to further increase the overall properties of this high entropy carbide ceramic (HECC) through introducing SiC particle (SiCP). To this end, a series of (NbTaZrW)C‐xSiC ceramic composites (x = 0/5/15/30/50 vol.%) were fabricated using spark plasma sintering (SPS), their microstructure and mechanical properties were characterized. Our results reveal a grain refinement effects of SiCP, an agglomeration of SiCP with (100) plane preferentially perpendicular to the SPS‐pressing direction and the formation of a transition region with various stoichiometric ratio of (NbTaZrW)xC1‐x in the (NbTaZrW)C‐SiCP vicinity. The elastic modulus, microhardness and flexural strength of the HECCs show tight positive relations with the SiCP content and the beneficial effect of SiCP to the fracture toughness of (NbTaZrW)C becomes evident once the content of SiCP reaches 30 vol.%. Altogether, (NbTaZrW)C‐50%SiC, which has a microhardness of 22 GPa, a flexural strength of 455 MPa and an indentation fracture toughness of 6.54 MPa·m1/2, presents the optimal combination of mechanical properties among the investigated composites. Mechanistically, the strengthening effect of SiCP introduction arises from the intrinsic high hardness of SiCP and the SiCP‐induced grain refinement and the toughening effect is mainly associated with crack bridging mechanism. This article is protected by copyright. All rights reserved

Toward a low‐temperature sintering of carbon fiber toughened high entropy boride composite with Co addition

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Low-temperature sintered (Ti, Zr, Nb, Ta, Mo)C-based composites toughened with damage-free SiC w

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

Reactive sintered dense carbon fiber reinforced high‐entropy boride composite using high‐entropy silicide as reactant

Mechanical and thermal shock properties of C f /SiBCN composite: Effect of sintering densification and fiber coating

Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

Carbon-bonded Carbon Fiber Composites Containing Uniformly Distributed Silicon Carbide

Low-temperature densification of high entropy diboride based composites with fine grains and excellent mechanical properties

Enhancement mechanical properties of in-situ preparated B4C-based composites with small amount of (Ti3SiC2+Si)

Fabrication of low-density carbon-bonded carbon fiber composites with an Hf-based coating for high temperature applications

Microstructure Evolution and Hardness Improvement of WC-Co Composites Sintered with Fe Substituting Part of Co Binder

The role of carbon addition on properties of boron carbide- silicon carbide composites

Effect of Co on microstructures and mechanical properties for Nb-Si based in-situ composites

Mechanical properties of SiC fiber/carbon/Si‐Co matrix composites processed using film boiling and melt infiltration

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

Effect of cobalt content on the microstructure, microtexture, and mechanical properties of W-Ni-Fe-xCo alloys during solid-phase-sintering and liquid-phase-sintering

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Improving mechanical properties of continuous carbon fiber-reinforced ZrB 2 -ZrSi 2 composite by addition of activated carbon

Preparation of high-performance (ZrHfTaNbTiMo)C–10Co ceramic by SPS using self-synthesized fine high-entropy carbide powders