Abstract:While the use of low-melting-point metals as sintering aids for high-entropy carbide (HEC) ceramics has been well established, their existence can compromise hardness due to residual metallic inclusions. This study demonstrates an innovative strategy to meet this challenge, where (Ti,Zr,Nb,Ta,Mo)C high-entropy carbide ceramics with ultrafine grains and enhanced hardness are obtained through chromium (Cr)-metal-assisted spark plasma sintering (SPS) at a temperature as low as 1600 degrees C. The results show that the addition of 5 vol% Cr promotes the formation of highly densified single HEC phase ceramics with a high relative density (98.4%) and an ultrafine-grained microstructure (0.17 mu m). This low-temperature densification mechanism can be attributed to Cr's solid-solution effect within the matrix and the increased carbon vacancies generated during sintering. The grain size of the (Ti,Zr,Nb,Ta,Mo)C ceramics with 5 vol% Cr metal addition is significantly smaller than that of Cr-free (Ti,Zr,Nb,Ta,Mo)C ceramics sintered at 2000 degrees C (3.03 mu m) or via traditional low-temperature liquid-phase sintering (1.3-1.5 mu m). Importantly, the addition of 5 vol% Cr substantially increased the hardness of the ceramics, with a remarkable increase from 23.57 to 28.16 GPa compared to that of the pure (Ti,Zr,Nb,Ta,Mo)C ceramics, owing to the fine-grain strengthening and solid-solution strengthening mechanisms. This work highlights the uniqueness of Cr metal as a sintering aid in achieving densification and hardness improvements in (Ti,Zr,Nb,Ta,Mo)C ceramics, offering a promising strategy for improving the properties of HEC materials for further development in the near future.

Low-temperature sintered (Ti, Zr, Nb, Ta, Mo)C-based composites toughened with damage-free SiC w

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

Toughened (ti0.2zr0.2hf0.2nb0.2ta 0.2)B2-Sic Composites Fabricated by One-Step Reactive Sintering with a Unique SiB6 Additive

Toward a low‐temperature sintering of carbon fiber toughened high entropy boride composite with Co addition

Densification, Strengthening and Toughening in Hafnium Carbide with the Addition of Silicon Carbonitride

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Microstructure, mechanical and friction-wear properties of SiC-WC composite with Al and C as sintering aids

Effect of SiC whiskers on microstructure and mechanical properties of the MoSi2-SiCw composites

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Correlation between phase content and mechanical properties of SiCw- ZTA composites sintered by SPS

Effect of SiC on Microstructure, Phase Evolution, and Mechanical Properties of Spark-Plasma-Sintered High-Entropy Ceramic Composite

Effect of Sintering Temperature on Microstructure and Mechanical Properties of WC-Co-Ti<sub>3</sub>SiC<sub>2</sub> Cemented Carbides

Enhanced Toughness of High-Entropy Carbide Ceramic (tizrhfnbta)0.2c Through Composite B4c

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

Cr-assisted Low-Temperature Densification of (ti,zr,nb,ta,mo)c High-Entropy Carbides with Ultrafine Grain and Enhanced Hardness

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Mechanical Properties and Toughening Mechanisms of Ceramic Composites

The Effect of Cbn Additions on Densification, Microstructure and Properties of WC–Co Composites by Pulse Electric Current Sintering

Low temperature sintering of ZrC-SiC composite