Abstract:This research characterizes the dynamic hardening behavior of an aluminum alloy sheet of 5182-O for the coupling effect of strain rate and temperature. Tests are carried out for dogbone specimens at different loading conditions to experimentally characterize the strain rate hardening and thermal softening effect for the alloy. The behaviours are then modeled by the Johnson-Cook, Zerilli-Armstrong and Lim-Huh models. In addition, the FEA-friendly polynomial model and artificial neural network (ANN) model are used to describe the highly non-linearity and coupling of strain hardening. Factors affecting ANN predicting accuracy and numerical computing efficiency are comprehensively studied including network structure, parameter settings and optimization algorithms. All the analytical and ANN models are also implemented into ABAQUS/Explicit to numerically compute the reaction force of tensile tests of dogbone specimens. The strain hardening curves are predicted by the analytical and ANN models for the comparison with experimental measurements to evaluate their performance. The experimental results show that the strain rate is slightly negative at room temperature, while the strain rate effect turns to be positive as temperature rises. The comparison of the flow curves between prediction and experiments reveals that the coupling effect is reasonably illustrated by the proposed polynomial model and the ANN model illustrates the flow curves with the dramatically much better accuracy than all the other models. The numerically predicted reaction forces prove that the ANN model accurately illustrates the load capability with the best agreement among the models studied in this research. The numerical computation also shows that the numerical computation efficiency of the ANN model is slightly reduced compared with analytical models, but the reduction is not much and worthwhile compared with the high accuracy of ANN.

Characteristics of work hardening and constitutive models comparison of powder metallurgy Al-5.6Zn-2Mg alloy during hot compression

A Physically-Based Constitutive Modelling of a High Strength Aluminum Alloy at Hot Working Conditions

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation

Microstructural and constitutive relationship in process modeling of hot working: The case of a 60Mg-30Pb-9.2Al-0.8B magnesium alloy

Characterization of Hot Deformation Behavior and Constitutive Modeling of Al–Mg–Si–Mn–Cr Alloy

Comparative Study on Several Constitutive Models of GCr15 Steel at High Strain Rates

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

Constitutive behavior and novel characterization of hot deformation of Al-Zn-Mg-Cu aluminum alloy for lightweight traffic

Dynamic Recrystallization Critical Conditions and a Physically–Based Constitutive Model of Al–4.8Mg Alloy Under Hot Working Conditions

Constitutive behavior of as-cast A356

A Comparative Study on Modified and Optimized Zerilli-Armstrong and Arrhenius-Type Constitutive Models to Predict the Hot Deformation Behavior in 30si2mncrmove Steel

A Modified Johnson–Cook Model and Microstructure Evolution of As-Extruded AA 2055 Alloy during Isothermal Compression

Unravelling the Hot Working Behavior, Constitutive Modeling, and Processing Map for Controlling the Microstructure of Sintered Al–Zn–Mg Alloy

Hot Deformation Constitutive Model and Processing Maps of Homogenized Al–5Mg–3Zn–1Cu Alloy

An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy

Constitutive model for hot deformation of aluminum alloy

A modified Johnson-Cook model considering strain softening of A356 alloy

Constitutive Equation and Hot Processing Map of Mg-16Al Magnesium Alloy Bars

Deformation Behavior and Constitutive Model for High Temperature Compression of a Newly Type of Ni3Al‐based Superalloy

Mechanical Properties and Constitutive Model of Aluminum Powder/rubber Matrix Composites Compressed at Various Strain Rates