Abstract:Ultra-High Toughness Cementitious Composite (UHTCC) represents a composite material meticulously engineered on the foundation of micromechanical principles. The multi-crack cracking and strain-hardening characteristics of UHTCC enable it to be applied to orthotropic steel decks to control the crack width. Different from most studies which only focus on hybrid fiber or fatigue characteristics, this paper studies the influence of hybrid fiber content on static mechanical properties, flexural toughness, and flexural fatigue characteristics of UHTCC under different stress levels. The compressive and flexural strength, bending toughness, and fatigue damage of UHTCC under different fiber ratios were compared, and the fatigue properties of hybrid fiber UHTCC were verified. The results reveal that hybrid fiber exerts a more pronounced effect on toughness, augmenting the maximum folding ratio by 23.7%. Single-doped steel fiber UHTCC exhibits a characteristic strain-softening phenomenon attributable to inadequate fiber content, whereas the bending toughness index of hybrid fiber UHTCC surpasses that of SF1.5P0 by 18.6%. Under low-stress conditions, UHTCC demonstrates a nearly threefold increase in bending fatigue life with a mere 1% steel fiber content, while the influence of polyvinyl alcohol (PVA) fiber on fatigue life is more significant: with an increase of only 1/5 volume content, the fatigue life increased by 29.8%, reaching a maximum increase of 43.2% at 1/4 volume content. Furthermore, the fatigue damage accumulation curve of UHTCC follows a three-stage inverted S-shaped trajectory. The inclusion of PVA fiber facilitates early initiation of stable cracking during the fatigue failure process, thereby advancing the entire strain stability development stage and mitigating external load forces through the proliferation of micro-cracks. Consequently, compared to SF1P0, the ε0 of SF1P5 experiences a significant increase, reaching 143.43%.

Tension-tension fatigue properties of multiaxial laminated carbon/epoxy composites molded by high-pressure resin transfer molding (HP-RTM) process

Study on Flexural Fatigue Life of Ultra-High Toughness Cementitious Composites under Constant Amplitude Cyclic Loading

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Tension-Compression Fatigue Induced Stress Concentrations in Woven Composite Laminate

Fatigue resistance of ultra-high-modulus pitch-based carbon fiber/epoxy composites under tensile loading

Mechanical performance of carbon-epoxy laminates. Part II: quasi-static and fatigue tensile properties

Effect of Stress Ratio and Loading Inclination on the Fatigue Life of Carbon-Fiber-Reinforced Polymer Composites: Multiscale Analysis Approach

Static and fatigue cracking of thick carbon/glass hybrid composite laminates with complex wrinkle defects

Tensile fatigue response of a novel carbon/flax/epoxy hybrid composite under strain-controlled and stress-controlled amplitude

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies

Characterization on fatigue behavior and damage mechanism of C/BMI composites experienced thermal cycling

Experimental Data on Fracture of Open-Hole Composite Laminates Subjected to Tension Loading

Mechanical Behavior and Failure Mode of Woven Carbon/epoxy Laminate Composites under Dynamic Compressive Loading

Fatigue life prediction method of carbon fiber-reinforced composites

Multi‐scale damage analysis of filament‐wound carbon fiber‐reinforced epoxy composites for hydrogen storage tanks under high strain rates

Fatigue Deformation Behavior and Fiber Failure Mechanism of Ultra-High Toughness Cementitious Composites in Compression

Investigation of the Tensile Performance and Failure Mechanism of Carbon–aramid Hybrid Fibers/epoxy Sandwich Structure Laminates Using the UV-thermal Synergetic Curing Mechanism: Experimentation and Simulation

Fatigue failure simulation of a double-lap composites-metal bolted joint structure

Bending Fatigue Properties of Ultra-High Toughness Cementitious Composite (UHTCC)