Abstract:The thermal characterization of power devices is an inevitable task in the industry. Thermal transient testing is one of the major tools for this characterization, as it is not only capable of giving information about the actual thermal parameters but may also reveal the root cause of potential device failures. The testing may occur on single packages or modules on a dedicated standard test bench, or "in situ", in an actual assembly. The testing process itself is very fast in both cases, on the order of seconds, but the transient measurement needs to be preceded by a calibration step to determine the temperature dependence of a temperature-sensitive parameter (TSP) of the semiconductor device. This may require a long time, as the device has to be measured at many stabilized temperatures, which in the case of power devices may take hours. It also has to be considered that, especially in "in situ" measurements, reaching the highest device temperatures of power devices may even damage other parts of the surrounding electronics. Moreover, the temperature distribution inside a module will be different at calibration time than during operation with the same junction temperature, as bond wires and copper traces do not reach the chip temperature in the latter case. This paper presents a methodology that can be used to replace the lengthy measurement of one parameter at many temperatures with a fast single I–V characteristics measurement at room temperature. Physics-based calculations assign a unique temperature-sensitive parameter to each item of interest in the system. After the presentation of the theoretical background, the usability of the method is demonstrated by verifying measurements on silicon power devices.

A Modular High-Temperature Measurement Set-Up for Semiconductor Device Characterization

A Novel Method For On-Line Junction Temperature Measurement Of Power Modules

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

High temperature measurement set-up for the electro-mechanical characterization of robust thin film systems

A High Performance Power Module with >10kV capability to Characterize and Test In Situ SiC Devices at >200°C Ambient

High-Temperature Characterizations of a Half-Bridge Wire-Bondless SiC MOSFET Module

An analog to digital converter in a SiC CMOS technology for high-temperature applications

Characterization and Modeling of Self-Heating in Nanometer Bulk-CMOS at Cryogenic Temperatures

Customized measuring station for Peltier modules

Design Criteria of High-Temperature Integrated Circuits Using Standard SOI CMOS Process up to 300°C

High temperature Hall measurement setup for thin film characterization

High-Temperature Characterization of a 1.2-Kv SiC MOSFET Using Dynamic Short-Circuit Measurement Technique

High Temperature Physical Modeling and Verification of a Novel 4H-Sic Lateral JFET Structure

Temperature Sensing Elements for Harsh Environments in a 4H-SiC CMOS Technology

Set-Up for Measuring Thermal Parameters of Power Semiconductor Devices

Thermal Characterization of Silicon Carbide MOSFET Module Suitable for High-Temperature Computationally Efficient Thermal-Profile Prediction

Synchronous Measurement of Temperature and Deformation by an Ultraviolet Imaging System and Monochromatic Pyrometry at Extreme Temperatures

Analytical Prediction of the Thermal Behavior of Semiconductor Power Devices from Room-Temperature I–V Measurements

Characterization of Thermal Interface Materials to Support Thermal Simulation

High-temperature Characteristics of SiC Module and 100 Kw SiC AC-DC Converter at a Junction Temperature of 180 °C

High-Temperature Thermoelectric Characterization of III – V Semiconductor Thin Films by Oxide Bonding