Abstract:Abstract An experimental investigation of the vortical and turbulent structures in lobed jet mixing flows was conducted. The techniques of planar laser-induced fluorescence (PLIF) and particle image velocimetry (PIV) were used to accomplish flow visualisation and velocity filed measurements of the lobed jet mixing flows. Compared with a conventional circular jet flow, the lobed jet mixing flows were found to have a shorter laminar region, a smaller scale of spanwise Kelvin–Helmholtz vortices, quicker transition to turbulence and earlier appearance of small-scale vortical and turbulent structures. The intensive mixing of the core jet flow with ambient flow was found to concentrate within the first two nozzle diameters in the lobed jet mixing flow. More rapid growth of the shear layer at the near field and quicker decay of the central line velocity were also found in the lobed jet mixing flow. All these indicated a better mixing enhancement performance of the lobed nozzle compared with the conventional circular nozzle in the near-field region.Based on the PLIF and PIV results, two aspects of the mechanism of mixing enhancement in a lobed jet mixing flow were suggested. One is that a lobed nozzle can cause big azimuthal perturbations in the jet flow due to its special geometry, and the streamwise vortices produced by the lobed nozzle can enhanced the azimuthal perturbations. The “cut and connect” process of the large-scale spanwise Kelvin–Helmholtz vortex rings was accelerated. This is responsible for the avalanche of three-dimensional and smaller-scale motions and the generation of high turbulence. Another is that the “stretch effect” of streamwise vortices generated by the lobed nozzle on the spanwise Kelvin–Helmholtz vortical rings reduced the scale of the spanwise Kelvin–Helmholtz vortices, which also results in the creation of much small-scale intense turbulence and enhances the mixing of the core jet flow with the ambient flow.

Flow regimes and mixing characteristics in non-aligned T-jets reactors

Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental Study of Turbulent Mixing in A Tee Mixer Using Piv and Plif

Simultaneous Measurements of Velocity and Concentration Fields in an Inclined Jet in Crossflow

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

Mixing Behaviors of Jets in Cross-Flow for Heat Recovery of Partial Oxidation Process

Numerical Research on the Jet-Mixing Mechanism of Convergent Nozzle Excited by a Fluidic Oscillator and an Air Tab

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Cold flow characteristics of a novel high-hydrogen Micromix model burner based on multiple confluent turbulent round jets

Study on Flow Pattern in A Tubular Oscillatory Flow Reactor

FLOW AND DIFFUSION IN SELF-ASPIRATED REVERSE FLOW JET LOOP REACTOR

Quasi-direct numerical simulations of the flow characteristics of a thermal plasma reactor with counterflow jet

Structure optimization and flow field characteristics of baffle-type impinging stream reactor

Flow regime transition and bubble behavior in gas-liquid two-phase impinging jet reactor

Particle image velocimetry and planar laser-induced fluorescence measurements on lobed jet mixing flows

LBE simulation of impinging stream inside a T-junction mixer

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor

Exploration of Multishafts Stirred Reactors: An Investigation on Experiments and Large Eddy Simulations for Turbulent Chaos and Mixing Characteristics

Numerical Investigation of the Flow and Infrared Radiation Characteristics of Nozzles with Transverse Jets of Different Shapes