Abstract:New thermoplastic polyether- and polycarbonate-based segmented polyurethanes were synthesized by a catalyzed one-step melt polyaddition from diphenyl sulfide-derivative diol, i.e., 2,2′-[sulfanediylbis(benzene-1,4-diyloxy)]diethanol as a nonconventional chain extender, 1,1′-methanediylbis(4-isocyanatocyclohexane), and 40, 50, and 60 mol% poly(hexane-1,6-diyl carbonate) diol (PHCD) of M¯n=860g/mol$$\overline{M}_{\text{n}} = 8 60 \;{\text{g}}/{\text{mol}}$$ or poly(oxytetramethylene) diol (PTMO) of M¯n=1000g/mol$$\overline{M}_{\text{n}} = 1000 {\text{g}}/{\text{mol}}$$ as soft segments. The structures and thermal properties of the polymers were examined by FTIR, elemental analysis, differential scanning calorimetry, thermogravimetry (TG), and TG-FTIR. Moreover, their Shore A/D hardness, tensile, physicochemical, adhesive, and optical properties were determined. The obtained colorless, transparent, amorphous materials exhibited elastomeric or plastic properties. The PTMO-based polymers showed lower glass-transition temperatures than those based on PHCD (from −29 to 5 °C vs. from 11 to 43 °C) as well as a higher degree of microphase separation. On the other hand, the polymers with the polycarbonate soft segments revealed better transparency (transmittance at 800 nm: 84–89% vs. 75–82%), higher tensile strength (up to 48.6 MPa vs. up to 28.3 MPa), and hardness in comparison with those with the polyether soft segments. The polymers decomposed in two (in helium) or three (in air) stages and possessed a relatively good thermal stability. Their temperatures of 1% mass loss were contained within the range of 255–274 °C. In inert atmosphere, the values shown by polymers from PTMO were higher than those from PHCD, whereas in oxidative atmosphere, the situation was reversed. The newly synthesized sulfur-containing polymers showed a higher refractive index and adhesive strength to copper than analogous polymers based on butane-1,4-diol as a chain extender.

Synthesis of transparent thermoplastic polyurethane elastomers

Novel Polyethylene‐b‐polyurethane‐b‐polyethylene Triblock Copolymers: Facile Synthesis and Application

Transparent sulfur-containing thermoplastic polyurethanes with polyether and polycarbonate soft segments

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Transparency‐tunable and moderate‐temperature healable thermoplastic polyurethane elastomer based on bisphenol A chain‐extender

Synthesis and physical properties of poly(fluoroalkylether)urethanes

Synthesis and Properties of Polyurethaneureas with Two Soft Segments of HTPB-PTMG

Synthesis of UV Curable, Highly Stretchable, Transparent Poly(urethane-acrylate) Elastomer and Applications Toward Next Generation Technology

Effect of Chain Extender on Properties of Transparent Thermoplastic Polyurethane Elastomers

Synthesis of Eugenol-Based Polyols via Thiol–Ene Click Reaction and High-Performance Thermosetting Polyurethane Therefrom

Effect Of Chain Extender On Adhesive And Optical Properties Of Transparent Polyurethane Elastomers

Single-Step Synthesis and Characterization of Non-Linear Tough and Strong Segmented Polyurethane Elastomer Consisting of Very Short Hard and Soft Segments and Hierarchical Side-Reacted Networks and Single-Step Synthesis of Hierarchical Hyper-Branched Polyurethane

Synthesis and Properties of Main-Chain Liquid Crystalline Polyurethane Elastomers with Azoxybenzene

Synthesis and properties of high performance thermoplastic polycarbonate polyurethane elastomers through a non-isocyanate route

Transparent, flame‐retarded, self‐healable, mechanically strong polyurethane elastomers: Enabled by the synthesis of phosphorus/nitrogen‐containing oxime chain‐extender

Studies on the Synthesis and Properties of Aliphatic Thermoplastic Polyurethanes via Non-isocyanate Route

Synthesis and Applications of Hydroxyproline-derived Thermoplastic Elastomers

Trialkylsulfonium-Based Reprocessable Polyurethane Thermosets

A facile, alternative and sustainable feedstock for transparent polyurethane elastomers from chemical recycling waste PET in high-efficient way

Synthesis of Polyurethane Thermoplastic Elastomer via Phosphonium Borane Lewis Pair Mediated Sequential Homopolymerization of Epoxides and Copolymerization of Epoxides and p-Tosyl Isocyanate

Synthesis and Characterization of Biodegradable Polyurethanes with Unsaturated Carbon Bonds Based on Poly(Propylene Fumarate)