Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Synthesis and physical properties of poly(fluoroalkylether)urethanes

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Biobased Poly(ethylene-co-hexamethylene 2,5-Furandicarboxylate) (PEHF) Copolyesters with Superior Tensile Properties

Novel Polyethylene‐b‐polyurethane‐b‐polyethylene Triblock Copolymers: Facile Synthesis and Application

Effect of soft segment structure on properties of polyurethane elastomers

Synthesis and Characterization of Random Block Hydroxyl-Terminated Polyfluoroether-Based Polyurethane Elastomers with Fluorine-Containing Side Chains

Synthesis, characterization and properties of a novel fluorinated polyurethane

Synthesis and characterization of fluorine-containing polyester based on phthalic anhydride and tetrafluoropropyl glycidyl ether

Influence of flexible segment length on the phase structure and properties of poly(hexamethylene 2,5‐furandicarboxylate)‐block‐biopolytetrahydrofuran copolymers

Synthesis and Characterization of Hydroxyl-terminated Block Fluorinated Copolyether(FPO-PTHF-FPO)

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Synthesis and Characterization of Novel Fluorinated Polyurethane Elastomer Based on 1,4-Bis(4-amino-2-trifluoformethyloxyphenyl)benzene

Synthesis and properties novel polyurethane-hexafluorobutyl methacrylate copolymers

Synthesis of Mono Ethylene Glycol (MEG)-Based Polyurethane and Effect of Chain Extender on Its Associated Properties

Synthesis and Characterization of Novel Polyurethanes Based on Fluorine‐containing Polyphosphazene

Synthesis and Characterization of Novel Fluorinated Polyurethane Elastomers Based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromehyloxyphenyl) Phenyl]propane

Synthesis and Characterization of Fluorinated Polyurethane with Fluorine-Containing Pendent Groups

Synthesis, phase behavior, and simulated in vitro degradation of novel HTPB-b-PEG polyurethane copolymers

Synthesis and Characterization of Biodegradable Polyurethanes with Unsaturated Carbon Bonds Based on Poly(Propylene Fumarate)

Studies on Waterborne Polyurethanes Based on New Medium Length Fluorinated Diols

Fluorinated polyurethane based on liquid fluorine elastomer (LFH) synthesis via two-step method: the critical value of thermal resistance and mechanical properties