Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Synthesis and Properties of Main-Chain Liquid Crystalline Polyurethane Elastomers with Azoxybenzene

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Effect of soft segment structure on properties of polyurethane elastomers

Synthesis and Liquid Crystalline Properties of New Thermotropic Polyurethanes

Synthesis and Properties of Main-Chain Liquid Crystal Polyurethanes

Synthesis and Properties of Liquid Crystalline Polyurethanes from 4,4-Bis (6-Hydroxyhexoxy) Biphenyl and 3,3'-Dimethyl-4, 4’-Biphenylene Diisocyanate

A Novel Side Chain Liquid Crystalline Polyurethane

Synthesis and characterization of thermotropic liquid-crystalline polyurethanes containing biphenyl group

Interplay of Microphase Separation, Crystallization and Liquid Crystalline Ordering in Crystalline/liquid Crystalline Block Copolymers

Studies on the influence of soft-segment structure on the properties of polyurethane adhesive

Synthesis and physical properties of poly(fluoroalkylether)urethanes

SYNTHESIS AND CHARACTERIZATION OF A LIQUID CRYSTALLINE TRIBLOCK COPOLYMER CONTAINING ETHOXYCARBONYLAZOBENZENE UNITS

Synthesis and Characterization of New Liquid Crystalline Thermoplastic Elastomers Containing Mesogen-Jacketed Liquid Crystalline Polymers

Synthesis and Characterization of Thermotropic Liquid Crystal Polyureas Containing Biphenyl Group

Preparation and Properties of Multi-Responsive Liquid Crystalline Poly(urethane-acrylate)s and Its Composite Membranes

Synthesis and characterization of a novel kind of thermotropic liquid crystalline poly(urea-ester)s based on bis(4?-hydroxyphenyl)-tolyene-2,4-diurea

Synthesis and Properties of Polybutadiene-Containing Polyurethane-ureas Modified with Aminoethylaminopropyl Poly(dimethyl Siloxane)

SYNTHESIS AND CHARACTERIZATION OF MAIN CHAIN AROMATIC LIQUID CRYSTAL COPOLYESTERS WITH X-SHAPED AND ROD-SHAPED MESOGENIC UNITS *

Organic-inorganic polyureas with benzyl hindered urea bonds and POSS cages in the main chains: Synthesis, shape memory and reprocessing properties

Synthesis and Properties of Polyurethaneureas with Two Soft Segments of HTPB-PTMG

Morphology and Thermal Properties of Polyurethane Elastomer Based on Representative Structural Chain Extenders