Abstract:Metasurfaces are expected to realize the miniaturization of conventional refractive optics into planar structures; however, they suffer from large chromatic aberration due to the high phase dispersion of their subwavelength building blocks, limiting their real applications in imaging and displaying systems. In this paper, a high-efficient broadband achromatic metasurface (HBAM) is designed and numerically demonstrated to suppress the chromatic aberration in the continuous visible spectrum. The HBAM consists of TiO2 nanofins as the metasurface building blocks (MBBs) on a layer of glass as the substrate, providing a broadband response and high polarization conversion efficiency for circularly polarized incidences in the desired bandwidth. The phase profile of the metasurface can be separated into two parts: the wavelength -independent basic phase distribution represented by the Pancharatnam-Berry (PB) phase, depending only on the orientations of the MBBs, and the wavelength-dependent phase dispersion part. The HBAM applies resonance tuning for compensating the phase dispersion, and further eliminates the chromatic aberration by integrating the phase compensation into the PB phase manipulation. The parameters of the HBAM structures are optimized in finite difference time domain (FDTD) simulation for enhancing the efficiency and achromatic focusing performance. Using this approach, this HBAM is capable of focusing light of wavelengths covering the entire visible spectrum (from 400 nm to 700 nm) at the same focal plane with the spot sizes close to the diffraction limit. The minimum polarization conversion efficiency of most designed MBBS in such spectrum is above 20%. This design could be viable for various practical applications such as cameras and wearable optics.

Broadband optical antireflection metasurface design for F-P micro-optical accelerometers

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Optical Design and Analysis of a High Resolution MOEMS Accelerometer Based on Diffraction Grating

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Single Chip-Based Nano-Optomechanical Accelerometer Based on Subwavelength Grating Pair and Rotated Serpentine Springs

High Efficient Metasurface for Broadband Achromatic Focusing in Visible Spectrum

Broadband Ultrasonic Focusing in Water with an Ultra-Compact Metasurface Lens

A microchip optomechanical accelerometer

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Ultra-high-resolution phase demodulation based miniature fiber-optic accelerometer at low and medium frequencies

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

Optimal design of high sensitive integrated optical accelerometer

Fiber Fabry-Perot accelerometer with extended dynamic range and low noise floor

Optical micro/nanofiber enabled wearable accelerometer

Fiber Optic Accelerometer Based on Fiber-Mirror Interference Cavity

Novel optical accelerometer based on Fresnel diffractive micro lens

A MEMS Based Fabry–Pérot Accelerometer with High Resolution

Metasurface spectrometers beyond resolution-sensitivity constraints

Novel High Sensitivity Accelerometer Based on A Microfiber Loop Resonator

Silicon micromechanical accelerometer using an optical fiber