Abstract:Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of Phi(M1)/Phi(M2) have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.

3D Logic Cells Design and Results Based on Vertical NWFET Technology Including Tied Compact Model

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

III-V Gate-all-around Nanowire MOSFET Process Technology: from 3D to 4D

Simulation Study of Lateral Ceft Logic Performance at 3 Nm Node

NS-GAAFET Compact Modeling: Technological Challenges in Sub-3-nm Circuit Performance

A Novel Nanosheet Reconfigurable Field Effect Transistor with Dual-Doped Source/drain

III&#x2013;V 4D Transistors

Multi-VT Design of Vertical Channel Nanowire FET for Sub-10Nm Technology Node

A Compact Model of Silicon-Based Nanowire Field Effect Transistor for Circuit Simulation and Design

Logic Gates Based on 3D Vertical Junctionless Gate-All-Around Transistors with Reliable Multilevel Contact Engineering

A Compact Model for Nanowire Tunneling-FETs

Vertical Silicon Nanowire CMOS Inverter

Simulation of Novel Nano Low-Dimensional FETs at the Scaling Limit

Vertical nanowire/nanosheet FETs with a horizontal channel for threshold voltage modulation

First Demonstration of Novel Vertical Gate-All-Around Field-Effect-Transistors Featured by Self-Aligned and Replaced High-κ Metal Gates

Compact model and projection of silicon nanowire tunneling transistors (NW-tFETs)

Revisiting Lateral-BTBT Gate-Induced Drain Leakage in Nanowire FETs for 1T-DRAM

Gate-all-around NWFETs vs. triple-gate FinFETs: Junctionless vs. extensionless and conventional junction devices with controlled EWF modulation for multi-VT CMOS

Channel and Gate Workfunction-Engineered CNTFETs for Low-Power and High-Speed Logic and Memory Applications

Design Technology Co-Optimization for Gate-All-Around Nanosheet Transistors Considering Source/Drain Confinement and Post- Gate Single Diffusion Break

A Simulation Study of a Gate-All-Around Nanowire Transistor with a Core–Insulator