Behavior of eccentrically loaded steel tubes infilled with precast segments containing DCLs

Cheng-Wei Peng,Bo Wu

DOI: https://doi.org/10.1016/j.jcsr.2020.106261

IF: 4.349

2020-10-01

Journal of Constructional Steel Research

Abstract:<p>The behavior of a new type of thin-walled steel-jacketed column under eccentric loading was simulated using two methods: constant confining pressure and variable confining pressure. The influence of the spatial distribution of the confining effect on the performance of such eccentrically loaded columns is discussed. The error between the two types of calculated eccentric bearing capacities was less than 6.3%; however, there are obvious differences in the stress distribution of the core concrete when using the different methods. The proposed columns tested were fabricated by stacking precast segments (PSs) into the tube and then infilling the space with post-pouring concrete (PPC). The PSs were fabricated by incorporating demolished concrete lumps (DCLs). Fourteen specimens were examined in the laboratory under eccentric loading. The experimental results confirm that such columns perform almost the same as traditional concrete-filled steel tubes using DCLs directly. The eccentricity and strength of the PPC are the two most critical determinants of the performance of such columns under eccentric loading. The complete test results are reported.</p>

construction & building technology,engineering, civil