Abstract:Heavy oil accounts for a considerable proportion of the world's petroleum resources, and its exploitation helps to mitigate reliance on conventional oil resources and diversify energy supply. However, due to the high viscosity and high adhesion characteristics of heavy oil, conventional methods such as thermal recovery, emulsification, and dilution have significant limitations and cannot meet the growing demands for heavy oil production. In this study, 3-propyltrimethoxysilane (MPS) was used to modify and graft amphiphilic surfactants (AS) onto nanosilica to prepare a salt-resistant (total mineralization > 8000 mg/L, Ca2+ + Mg2+ > 1000 mg/L) and temperature-resistant (250 °C) nanosilicon viscosity reducer (NSD). This article compares amphiphilic surfactants (AS) as conventional viscosity-reducing agents with NSD. FTIR and TEM measurements indicated successful bonding of 3-propyltrimethoxysilane to the surface of silica. Experimental results show that at a concentration of 0.2 wt% and a mineralization of 8829 mg/L, the viscosity reduction rates of thick oil (LD-1) before and after aging were 85.29% and 81.36%, respectively, from an initial viscosity of 38,700 mPa·s. Contact angle experiments demonstrated that 0.2 wt% concentration of NSD could change the surface of reservoir rock from oil-wet to water-wet. Interfacial tension experiments showed that the interfacial tension between 0.2 wt% NSD and heavy oil was 0.076 mN/m. Additionally, when the liquid-to-solid ratio was 10:1, the dynamic and static adsorption amounts of 0.2 wt% NSD were 1.328 mg/g-sand and 0.745 mg/g-sand, respectively. Furthermore, one-dimensional displacement experiments verified the oil recovery performance of NSD at different concentrations (0.1 wt%, 0.15 wt%, 0.2 wt%, 0.25 wt%) at 250 °C and compared the oil recovery efficiency of 0.2 wt% NSD with different types of demulsifiers. Experimental results indicate that the recovery rate increased with the increase in NSD concentration, and 0.2 wt% NSD could improve the recovery rate of heavy oil by 22.8% at 250 °C. The study of nano-demulsification oil recovery systems can effectively improve the development efficiency of heavy oil.

Preparation of surface modified nano-hydrotalcite and its applicaiton as a flow improver for crude oil

Synthesis of Modified Nano-Hydrotalcite Clay by Micellar Method and Its Application as Gel-like Crude Oil Flow Improver

Synthesis and functionalization of carbon nanospheres from asphaltene fraction for crude oil upgrading and viscosity reduction

Effects of spherical, disk-like and lamellar nanocomposite particles on cold flow behaviors of waxy crude oil

Optimizing nanofluid additives for enhanced thermophysical properties in anionic crude oil for EOR applications

Synthesis of alkylbenzenesulfonate and its behavior as flow improver in crude oil

Inhibition of wax crystallization and asphaltene agglomeration by core-shell polymer@SiO 2 hybride nano-particles

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Application and evaluation of nanohybrid polymer as flow improver for Indian crude oil

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Synthesis of Alkyl Aliphatic Hydrazine and Application in Crude Oil as Flow Improvers

Development and application of amphiphilic carbon nanotube viscosity reduction systems for enhancing oil recovery of heavy oil reservoirs

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

In situ modification of heavy oil catalyzed by nano-sized metal-organic framework at mild temperature and its mechanism

Preparation and properties of modified nano-montmorillonite viscosity reducers

Synthesis and Application of a Spirocompound as Clean Viscosity-Reducer for Crude Oil

The Influencing Factors and Mechanism of Anionic and Zwitterionic Surfactant on Viscosity Reduction in Heavy O/W Emulsions

Effect of nanocomposite pour point depressant EVAL/CNT on flow properties of waxy crude oil

Integrating low salinity water, surfactant solution, and functionalized magnetite nanoparticles with natural acidic groups for enhanced oil recovery: Interfacial tension study

An experimental investigation and flow-system simulation about the influencing of silica–magnesium oxide nano-mixture on enhancing the rheological properties of Iraqi crude oil