Abstract:Heavy oil accounts for a considerable proportion of the world's petroleum resources, and its exploitation helps to mitigate reliance on conventional oil resources and diversify energy supply. However, due to the high viscosity and high adhesion characteristics of heavy oil, conventional methods such as thermal recovery, emulsification, and dilution have significant limitations and cannot meet the growing demands for heavy oil production. In this study, 3-propyltrimethoxysilane (MPS) was used to modify and graft amphiphilic surfactants (AS) onto nanosilica to prepare a salt-resistant (total mineralization > 8000 mg/L, Ca2+ + Mg2+ > 1000 mg/L) and temperature-resistant (250 °C) nanosilicon viscosity reducer (NSD). This article compares amphiphilic surfactants (AS) as conventional viscosity-reducing agents with NSD. FTIR and TEM measurements indicated successful bonding of 3-propyltrimethoxysilane to the surface of silica. Experimental results show that at a concentration of 0.2 wt% and a mineralization of 8829 mg/L, the viscosity reduction rates of thick oil (LD-1) before and after aging were 85.29% and 81.36%, respectively, from an initial viscosity of 38,700 mPa·s. Contact angle experiments demonstrated that 0.2 wt% concentration of NSD could change the surface of reservoir rock from oil-wet to water-wet. Interfacial tension experiments showed that the interfacial tension between 0.2 wt% NSD and heavy oil was 0.076 mN/m. Additionally, when the liquid-to-solid ratio was 10:1, the dynamic and static adsorption amounts of 0.2 wt% NSD were 1.328 mg/g-sand and 0.745 mg/g-sand, respectively. Furthermore, one-dimensional displacement experiments verified the oil recovery performance of NSD at different concentrations (0.1 wt%, 0.15 wt%, 0.2 wt%, 0.25 wt%) at 250 °C and compared the oil recovery efficiency of 0.2 wt% NSD with different types of demulsifiers. Experimental results indicate that the recovery rate increased with the increase in NSD concentration, and 0.2 wt% NSD could improve the recovery rate of heavy oil by 22.8% at 250 °C. The study of nano-demulsification oil recovery systems can effectively improve the development efficiency of heavy oil.

Development and application of amphiphilic carbon nanotube viscosity reduction systems for enhancing oil recovery of heavy oil reservoirs

Viscosity Reduction Behavior of Carbon Nanotube Viscosity Reducers with Different Molecular Structures at the Oil–Water Interface: Experimental Study and Molecular Dynamics Simulation

Advanced multi-wall carbon nanotube-optimized surfactant-polymer flooding for enhanced oil recovery

Potential application of novel Janus amphiphilic nanoparticles to improve the viscoelasticity of polymer solution for enhanced oil recovery

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

Pore-scale experimental investigation of oil recovery enhancement in oil-wet carbonates using carbonaceous nanofluids

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

A Feasibility Study on Enhanced Oil Recovery of Modified Janus Nano Calcium Carbonate-Assisted Alkyl Polyglycoside to Form Nanofluids in Emulsification Flooding

Investigation of the synergistic effect of alumina nanofluids and surfactant on oil recovery – Interfacial tension, emulsion stability and viscosity reduction of heavy oil

Nanofluid-Induced Wettability Gradient and Imbibition Enhancement in Natural Porous Media: A Pore-scale Experimental Investigation

The comparison of interface properties on crude oil-water and rheological behavior of four polymeric nanofluids (nano-SiO2, nano-CaO, GO and CNT) in carbonates for enhanced oil recovery

An amphiphilic nano titanium dioxide based nanofluid: Preparation, dispersion, emulsion, interface properties, wettability and application in enhanced oil recovery

Investigation of synergy between nanoparticle and surfactant in stabilizing oil-in-water emulsions for improved heavy oil recovery

Synthesis and functionalization of carbon nanospheres from asphaltene fraction for crude oil upgrading and viscosity reduction

Optimizing nanofluid additives for enhanced thermophysical properties in anionic crude oil for EOR applications

2D Janus polymer nanosheets for enhancing oil recovery: From material preparation to property evaluation

An amphiphilic nano calcium carbonate: preparation, emulsification, interface properties, and displacement mechanism in low permeability reservoir

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery

Emulsification and interfacial characteristics of different surfactants enhances heavy oil recovery: experimental evaluation and molecular dynamics simulation study

Synthesis of Modified Nano-Hydrotalcite Clay by Micellar Method and Its Application as Gel-like Crude Oil Flow Improver