Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Quadripolymers As Viscosity Reducers for Heavy Oil

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Research and performance evaluation of CO2 solubilization synergist for heavy oil

Viscosity Reduction Process of Heavy Oil by Catalytic Co-Pyrolysis with Sawdust

Asphaltene Inhibition and Flow Improvement of Crude Oil with a High Content of Asphaltene and Wax by Polymers Bearing Ultra-Long Side Chain

Novel Terpolymers As Viscosity Reducing Agent for Tahe Super Heavy Oil

Synthesis of Polycarboxylate Viscosity Reducer and the Effect of Different Chain Lengths of Polyether on Viscosity Reduction of Heavy Oil

Synthesis and Molecular Dynamics Simulation of Amphiphilic Low Molecular Weight Polymer Viscosity Reducer for Heavy Oil Cold Recovery

Effect of molecular weight on the properties of water-soluble terpolymers for heavy oil viscosity reduction

Influences of the Molecular Weight and Its Distribution of Poly(Styrene-Alt-Octadecyl Maleimide) As A Flow Improver for Crude Oils

Molecular Design of the Amphiphilic Polymer as a Viscosity Reducer for Heavy Crude Oil: From Mesoscopic to Atomic Scale

Synthesis of alkylbenzenesulfonate and its behavior as flow improver in crude oil

Synthesis and Mechanistic Investigation of an Amphiphilic Polymer in Enhancing Extra-Heavy Oil Recovery via Viscosity Reduction

Synthesis of Alkyl Aliphatic Hydrazine and Application in Crude Oil as Flow Improvers

Design, synthesis and properties evaluation of emulsified viscosity reducers with temperature tolerance and salt resistance for heavy oil

Improving Heavy Oil Production Using Viscosity Reducers

Role of acrylate terpolymers in flow assurance studies of crude oil

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Preparation and controllable heavy oil viscosity reduction performance of pH-responsive star block copolymers

Synthesis and application of amphiphilic copolymer as demulsifier for super heavy oil emulsions