Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Effects of spherical, disk-like and lamellar nanocomposite particles on cold flow behaviors of waxy crude oil

Effect of nanocomposite pour point depressant EVAL/CNT on flow properties of waxy crude oil

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Inhibition of wax crystallization and asphaltene agglomeration by core-shell polymer@SiO 2 hybride nano-particles

A review of nanoparticles and their composites as pour point depressant for waxy crude oil

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Role of a Nanocomposite Pour Point Depressant on Wax Deposition in Different Flow Patterns from the Perspective of Crystallization Kinetics

Preparation and Performance Evaluation of a New Type of Polyethylene-vinyl Acetate/Polystyrene Microsphere Composite Pour Point Depressant for Waxy Crude Oil

Insights into Flow Improving for Waxy Crude Oil Doped with EVA/SiO 2 Nanohybrids

Study on structure control and pour point depression mechanism of comb-type copolymers

Preparation of surface modified nano-hydrotalcite and its applicaiton as a flow improver for crude oil

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Experimental Study of the Effects of a Nanocomposite Pour Point Depressant on Wax Deposition

Optimizing the low‐temperature performance of high‐wax‐content crude oil with emulsion‐based wax inhibitors: Mechanisms and efficacy

Preparation and evaluation of polymeric nanocomposites based on EVA/montmorillonite, EVA/palygorskite and EVA/halloysite as pour point depressants and flow improvers of waxy systems

Application and evaluation of nanohybrid polymer as flow improver for Indian crude oil

Research Status and Challenges of Mechanism, Characterization, Performance Evaluation, and Type of Nano-Pour Point Depressants in Waxy Crude Oil

Performance improvement on the cold flow properties of crude oil with high asphaltene by adjusting the polarity of the third monomer in polymers

Synthesis and functionalization of carbon nanospheres from asphaltene fraction for crude oil upgrading and viscosity reduction

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Synthesis of Modified Nano-Hydrotalcite Clay by Micellar Method and Its Application as Gel-like Crude Oil Flow Improver