Abstract:Heavy oil accounts for a considerable proportion of the world's petroleum resources, and its exploitation helps to mitigate reliance on conventional oil resources and diversify energy supply. However, due to the high viscosity and high adhesion characteristics of heavy oil, conventional methods such as thermal recovery, emulsification, and dilution have significant limitations and cannot meet the growing demands for heavy oil production. In this study, 3-propyltrimethoxysilane (MPS) was used to modify and graft amphiphilic surfactants (AS) onto nanosilica to prepare a salt-resistant (total mineralization > 8000 mg/L, Ca2+ + Mg2+ > 1000 mg/L) and temperature-resistant (250 °C) nanosilicon viscosity reducer (NSD). This article compares amphiphilic surfactants (AS) as conventional viscosity-reducing agents with NSD. FTIR and TEM measurements indicated successful bonding of 3-propyltrimethoxysilane to the surface of silica. Experimental results show that at a concentration of 0.2 wt% and a mineralization of 8829 mg/L, the viscosity reduction rates of thick oil (LD-1) before and after aging were 85.29% and 81.36%, respectively, from an initial viscosity of 38,700 mPa·s. Contact angle experiments demonstrated that 0.2 wt% concentration of NSD could change the surface of reservoir rock from oil-wet to water-wet. Interfacial tension experiments showed that the interfacial tension between 0.2 wt% NSD and heavy oil was 0.076 mN/m. Additionally, when the liquid-to-solid ratio was 10:1, the dynamic and static adsorption amounts of 0.2 wt% NSD were 1.328 mg/g-sand and 0.745 mg/g-sand, respectively. Furthermore, one-dimensional displacement experiments verified the oil recovery performance of NSD at different concentrations (0.1 wt%, 0.15 wt%, 0.2 wt%, 0.25 wt%) at 250 °C and compared the oil recovery efficiency of 0.2 wt% NSD with different types of demulsifiers. Experimental results indicate that the recovery rate increased with the increase in NSD concentration, and 0.2 wt% NSD could improve the recovery rate of heavy oil by 22.8% at 250 °C. The study of nano-demulsification oil recovery systems can effectively improve the development efficiency of heavy oil.

Inhibition of wax crystallization and asphaltene agglomeration by core-shell polymer@SiO 2 hybride nano-particles

Viscosity Modification of Lubricating Oil Based on High-Concentration Silica Nanoparticle Colloidal System

Effects of spherical, disk-like and lamellar nanocomposite particles on cold flow behaviors of waxy crude oil

Asphaltene Inhibition and Flow Improvement of Crude Oil with a High Content of Asphaltene and Wax by Polymers Bearing Ultra-Long Side Chain

Synthesis of Modified Nano-Hydrotalcite Clay by Micellar Method and Its Application as Gel-like Crude Oil Flow Improver

Insights into Flow Improving for Waxy Crude Oil Doped with EVA/SiO 2 Nanohybrids

Probing the interaction between asphaltene-wax and its effects on the crystallization behavior of waxes in heavy oil via molecular dynamics simulation

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Study on the Kinetic Process of Asphaltene Precipitation during Crude Oil Mixing and Its Effect on the Wax Behavior of Crude Oil

Preparation of surface modified nano-hydrotalcite and its applicaiton as a flow improver for crude oil

Research Progress in Nanoparticle Inhibitors for Crude Oil Asphaltene Deposition

Preparation and mechanism of hyperbranched polymer as paraffin inhibitor and pour point depressant for high waxy crude oil

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Inhibition of Asphaltene Precipitation by Ionic Liquid Polymers Containing Imidazole Pendants and Alkyl Branches

Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors

Role of a Nanocomposite Pour Point Depressant on Wax Deposition in Different Flow Patterns from the Perspective of Crystallization Kinetics

Study on the preparation and mechanism of oil-soluble amphiphilic polymer asphaltene inhibitor

Molecular Dynamics Simulation of Waxy Crude Oil Multiphase System Depositing and Sticking on Pipeline Inner Walls and the Micro Influence Mechanism of Surface Physical–Chemical Characteristics

The Role of Amphiphilic Nanosilica Fluid in Reducing Viscosity in Heavy Oil

Water Droplets Tailored as Wax Crystal Carriers to Mitigate Wax Deposition of Emulsion

Synthesis and functionalization of carbon nanospheres from asphaltene fraction for crude oil upgrading and viscosity reduction