Abstract:Uniform ZrO(OH)2 nanocoatings on Ni‐rich hydroxide precursors are achieved via a decomposition‐promoted precipitation (DPP) protocol. Gradient surface Zr doping and refined microstructure in products are achieved through the following lithiation. This integrated modulation suppresses side reactions and deleterious phase transition. Consequently, the cell delivers a high‐capacity retention of 87.2% over 200 harsh cycles at 0.2 C. Ni‐rich layered cathodes with ultrahigh nickel content (≥90%), for example LiNi0.9Co0.1O2 (NC0.9), are promising for next‐generation high‐energy Li‐ion batteries (LIBs), but face stability issues related to structural degradation and side reactions during the electrochemical process. Here, surface modulation is demonstrated by integrating a Li+‐conductive nanocoating and gradient lattice doping to stabilize the active cathode efficiently for extended cycles. Briefly, a wet‐chemistry process is developed to deposit uniform ZrO(OH)2 nanoshells around Ni0.905Co0.095(OH)2(NC0.9‐OH) hydroxide precursors, followed by high temperature lithiation to create reinforced products featuring Zr doping in the crust lattice decorated with Li2ZrO3 nanoparticles on the surface. It is identified that the Zr4+ infiltration reconstructed the surface lattice into favorable characters such as Li+ deficiency and Ni3+ reduction, which are effective to combat side reactions and suppress phase degradation and crack formation. This surface control is able to achieve an optimized balance between surface stabilization and charge transfer, resulting in an extraordinary capacity retention of 96.6% after 100 cycles at 1 C and an excellent rate capability of 148.8 mA h g−1 at 10 C. This study highlights the critical importance of integrated surface modulation for high stability of cathode materials in next‐generation LIBs.

Enhanced Cycling Performance of the LiNiO2 Cathode in Li‐ion Batteries Enabled by Nb‐based Surface Coating

Research on Nb doping–coating composite modification of LiNiO2 cathode material for lithium-ion batteries

Synergistic Effects of Surface Coating and Bulk Doping in Ni‐Rich Lithium Nickel Cobalt Manganese Oxide Cathode Materials for High‐Energy Lithium Ion Batteries

Effect of Nb 5+ Doping and LiNbO 3 Coating on the Structure and Surface of a LiNi 0.8 Mn 0.2 O 2 Cathode Material for Lithium-Ion Batteries

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Lithium Phosphonate Functionalized Polymer Coating for High‐Energy Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with Superior Performance at Ambient and Elevated Temperatures

Enhancement of Structural, Electrochemical, and Thermal Properties of High-Energy Density Ni-Rich LiNi0.85Co0.1Mn0.05O2 Cathode Materials for Li-Ion Batteries by Niobium Doping

Heterogeneous doping-induced surface reconstruction toward high-performance LiNiO2 cathode materials for lithium-ion batteries

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Surface Modification of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries.

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Harmonious Dual-Riveting Interface Induced from Niobium Oxides Coating Toward Superior Stability of Li-Rich Mn-Based Cathode

Enhancing electrochemical performance of nickel-rich NCM cathode material through Nb modification across a wide temperature range

Nb2O5 Coating to Improve the Cyclic Stability and Voltage Decay of Li-Rich Cathode Material for Lithium-Ion Battery

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

A Facile Way to Adjust the Primary Particle Size and Lithium-Ion Diffusion Dynamics Via Nb Doping in Cobalt-Free Linio2 Cathode

Conditioning the Surface and Bulk of High-Nickel Cathodes with a Nb Coating: An In Situ X-ray Study