Abstract:Nb2O5 has been viewed as a promising anode material for lithium-ion batteries by virtue of its appropriate redox potential and high theoretical capacity. However, it suffers from poor electric conductivity and low ion diffusivity. Herein, we demonstrate the controllable fabrication of Cu-doped Nb2O5 with orthorhombic (T-Nb2O5) and monoclinic (H-Nb2O5) phases through annealing the solvothermally presynthesized Nb2O5 precursor under different temperatures in air, and the Cu doping amount can be readily controlled by the concentration of the precursor solution, whose effect on the lithium storage behaviors of the Cu-doped Nb2O5 is thoroughly investigated. H-Nb2O5 shows obvious redox peaks (Nb5+/Nb4+ and Nb4+/Nb3+) with much higher capacity and better cycling stability than those for the widely investigated T-Nb2O5. When introducing appropriate Cu doping, the optimized H-Cu0.1-Nb2O5 electrode shows greatly enhanced conductivity and lower diffusion barrier as revealed by the theoretical calculations and electrochemical characterizations, delivering a high reversible capacity of 203.6 mAh g-1 and a high capacity retention of 140.8 mAh g-1 after 5000 cycles at 1 A g-1, with a high initial Coulombic efficiency of 91% and a high rate capacity of 144.2 mAh g-1 at 4 A g-1. As a demonstration for full-cell application, the H-Cu0.1-Nb2O5||LiFePO4 cell displays good cycling performance, exhibiting a reversible capacity of 135 mAh g-1 after 200 cycles at 0.2 A g-1. More importantly, this work offers a new synthesis protocol of the monoclinic Nb2O5 phase with high capacity retention and improved reaction kinetics.

A Facile Way to Adjust the Primary Particle Size and Lithium-Ion Diffusion Dynamics Via Nb Doping in Cobalt-Free Linio2 Cathode

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Chemical-Mechanical Effects in Ni-Rich Cathode Materials

Effect of Nb5+ Doping and LiNbO3 Coating on the Structure and Surface of a LiNi0.8Mn0.2O2 Cathode Material for Lithium-Ion Batteries

Effect of Nb 5+ Doping and LiNbO 3 Coating on the Structure and Surface of a LiNi 0.8 Mn 0.2 O 2 Cathode Material for Lithium-Ion Batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Nb Doping Reduces the Primary Particle Size of the Li-Rich Cathode

A new high-valence cation pillar within the Li layer of compositionally optimized Ni-rich LiNi 0.9 Co 0.1 O 2 with improved structural stability for Li-ion battery

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

1D Nb-doped LiNi1/3Co1/3Mn1/3O2 Nanostructures As Excellent Cathodes for Li-ion Battery

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Electrolysis Process-Facilitated Engineering of Primary Particles of Cobalt-Free LiNiO2 for Improved Electrochemical Performance

Dual-functional boron-modification on a cobalt-free single-crystal layered cathode for high-voltage lithium-ion batteries

Effect of Nb5+ doping on LiNi0.5Co0.25Mn0.25O2 cathode material

Effect Of Niobium Doping On The Microstructure And Electrochemical Properties Of Lithium-Rich Layered Li[Li0.2ni0.2mn0.6]O-2 As Cathode Materials For Lithium Ion Batteries

Enhancing the Lithium Storage Performance of the Nb2O5 Anode Via Synergistic Engineering of Phase and Cu Doping

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.