Abstract:The intake duct is an important component of waterjet propulsion system and its hydraulic performance is directly connected with the capability of the waterjet pump and even the propulsion performance of the system. In order to optimize the flush-type intake duct, the present paper proposes a multi-objective optimization system including Design of Experiments (DOE), Computational Fluid Dynamics (CFD), three-dimensional parametric design, approximate model, the modified Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and a Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS). The nonuniformity and perpendicularity of outflow, and hydraulic efficiency for the intake duct are treated as the optimization objectives with four geometrical parameters as the design variables. Local sensitivity analyses indicate that the optimization objectives are significantly affected by the inclination angle and slightly affected by the lip vertical distance of the intake duct. During IVR = 0.3-0.8, the outflow quality and hydraulic efficiency of the optimised intake duct are greatly improved. The nonuniformity after optimization decreases by 27.8% and perpendicularity increases by 3.07% at the design condition of IVR = 0.7 and V-s = 19.49 m/s. Based on the flow at the outlet plane of intake duct, the pressure distribution after optimization is very uniform and the tangential velocity is small without obvious secondary flow. During the application to a mixed-flow waterjet propulsion system at various navigation speeds, the nonuniformity of the optimized intake duct decreases by 20.4% and perpendicularity increases by 4.11% on average, demonstrating that the optimized intake duct performs a better outflow quality. It is also noted that the non-uniform flow from the intake duct mainly affects pressure distribution on the suction surface of impeller blade and causes different shaft power.

Optimisation strategy to enhance the performance and efficiency of self-rotary water-jet derusting sprayers

Layout Optimization for Underwater Nozzle Array of Air-Lifted Artificial Upwelling System Based on Discrete Particle Swarm Algorithm

Novel topology optimization method based on adaptive genetic algorithm to improve the hull rust-removal efficiency of a reaction rotating sprinkler

Study on the Optimal Design for Cavitation Reduction in the Vortex Suction Cup for Underwater Climbing Robot

Design Method of Water Jet Pump Towards High Cavitation Performances

Design Optimization Of A Mixed Flow Waterjet Pump For Performance Improvement Involving Cavitation

Multi-objective Optimization of the Flush-Type Intake Duct for a Waterjet Propulsion System

Multi-objective optimization design of the intake duct for a waterjet system

Design of Contra-Rotating Waterjet Pump Based on High Cavitation Performances

Simulation and Optimization of the Nozzle Section Geometry for a Suspension Abrasive Water Jet

Investigation on Optimization Design of High-Thrust-Efficiency Pump Jet Based on Orthogonal Method

Optimization of Abrasive Water Jet Nozzle Based on Numerical Simulation

Structure optimization of submerged water jet cavitating nozzle with a hybrid algorithm

Multi-Objective Parameter Optimized Design of Self-Oscillating Cavitation Jet Nozzles

Multi-objective parameters optimization design of self-excited oscillation pulsed atomizing nozzle

Research on the structures and hydraulic performances of the typical direct jet nozzles for water jet technology

Numerical Prediction of Solid Particle Erosion in Jet Pumps Based on a Calibrated Model

Multifactor response-based optimization for enhancing cavitation performance of short injection self-priming pumps

Research on Multiphase Flow and Nozzle Wear in a High-Pressure Abrasive Water Jet Cutting Head

Experimental Optimization of Jet Self-Priming Centrifugal Pump Based on Orthogonal Design and Grey-Correlational Method

Multi-objective optimization integrating weighted average surrogate model and NSGA-II intelligent algorithm applied to a self-excited oscillation mixer used in mixed flow descaling