Abstract:High-pressure submerged cavitation jet is widely used in the fields of material peening, petroleum drilling, and ocean engineering. The impact performance of the jet with intensive cavitation is related to the factors such as working condition and the nozzle geometry. To reveal the relationship between the nozzle divergent angle and the jet pressure on the unsteady characteristics of the jet, high-speed photography with frame rate of 20000 fps is used to record the image of the cavitation clouds. Grayscale analysis algorithm developed in MATLAB is used to study the effects of injecting condition on the special structure, unsteady characteristics, and shedding frequency of the cavitation bubbles. The impact load characteristics of the cavitation jet with different cavitation numbers and stand-off distances are recorded using a high-response pressure transducer. It is found that the cavitation number is the main factor affecting the cavitation morphology of the submerged jet. The lower the cavitation number is, the more intense the cavitation occurs. The outlet divergent angle of the convergent-divergent nozzle also has a significant influence on the development of the cavitation clouds. In the three nozzles with the outlet divergent angles of 40°, 80°, and 120°, the highest bubble concentration is formed usinga nozzle with a divergent angle of 40°, but the high-concentration cavitating bubbles are only distributed in a very small range of the nozzle outlet. The cavities generated by using the nozzle with a divergent angle of 80° can achieve good results in terms of concentration and distribution range, while the nozzle with divergent angle of 120° has lower cavitation performance due to the lack of the constraint at the outlet which intensifies the shear stress of the jet. According to the result of frame difference method (FDM) analysis, the jet cavitation is mainly formed in the vortex structure generated by the shearing layer at the nozzle exit, and the most severe region in the collapse stage is the rear end of the downstream segment after the bubble cloud sheds off. The impact load of the cavitation jet is mainly affected by the stand-off distance of the nozzle from the impinged target, while the nozzle outlet geometry also has an effect on the impact performance. Optimizing the stand-off distance and the outlet geometry of the nozzles is found to be a good way to improve the performance of the cavitation jet.

Research on the structures and hydraulic performances of the typical direct jet nozzles for water jet technology

Finite element analysis of nozzle selection based on high pressure water jet technology

Experimental investigation of internal and external flow fields of jetting nozzles with different structures

Design of Nozzle in Water Jet for Cutting Waste Steel and Its Experiments

Design of nozzle in Water Jet for Cutting Steel Srap and Its Experiments

Experimental and numerical investigation on the cavitation erosion effect and resonance effect of submerged water jets

Effect of Nozzle Geometry on the Flow Dynamics and Resistance Inside and Outside the Cone-Straight Nozzle

Simulation and Optimization of the Nozzle Section Geometry for a Suspension Abrasive Water Jet

Design Method of Water Jet Pump Towards High Cavitation Performances

EXPERIMENTAL STUDY ON THE EFFECTS OF HYDRAULIC CONFINING PRESSURE ON IMPACTING CHARACTERISTICS OF JETS

The Research on High-Speed Gas Jet of Rocket Nozzle Underwater

Research on Multiphase Flow and Nozzle Wear in a High-Pressure Abrasive Water Jet Cutting Head

Analysis of Rock Breaking Parameters and Simulation of Mechanical Characteristics of Multi-Nozzle Jet Impact

Investigation of the flow phenomena in high-pressure water jet nozzles

Optimization of Abrasive Water Jet Nozzle Based on Numerical Simulation

Experimental Study on the Unsteady Characteristics and the Impact Performance of a High-Pressure Submerged Cavitation Jet

Study on the Mechanism of High-Efficiency Rock Breaking by Hydraulic Jet Based on Explicit Dynamics

Investigation of the Jet Characteristics and Pulse Mechanism of Self-Excited Oscillating Pulsed Jet Nozzle

Numerical analysis of hydraulic properties of bionic nozzles and structural optimization based on CFD–FEA

Research on Flow Field Characteristics in Water Jet Nozzle and Surface Damage Caused by Target Impact

Influence of structural parameters of descaling nozzle on jet behavior