Abstract:The intake duct is an important component of waterjet propulsion system and its hydraulic performance is directly connected with the capability of the waterjet pump and even the propulsion performance of the system. In order to optimize the flush-type intake duct, the present paper proposes a multi-objective optimization system including Design of Experiments (DOE), Computational Fluid Dynamics (CFD), three-dimensional parametric design, approximate model, the modified Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and a Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS). The nonuniformity and perpendicularity of outflow, and hydraulic efficiency for the intake duct are treated as the optimization objectives with four geometrical parameters as the design variables. Local sensitivity analyses indicate that the optimization objectives are significantly affected by the inclination angle and slightly affected by the lip vertical distance of the intake duct. During IVR = 0.3-0.8, the outflow quality and hydraulic efficiency of the optimised intake duct are greatly improved. The nonuniformity after optimization decreases by 27.8% and perpendicularity increases by 3.07% at the design condition of IVR = 0.7 and V-s = 19.49 m/s. Based on the flow at the outlet plane of intake duct, the pressure distribution after optimization is very uniform and the tangential velocity is small without obvious secondary flow. During the application to a mixed-flow waterjet propulsion system at various navigation speeds, the nonuniformity of the optimized intake duct decreases by 20.4% and perpendicularity increases by 4.11% on average, demonstrating that the optimized intake duct performs a better outflow quality. It is also noted that the non-uniform flow from the intake duct mainly affects pressure distribution on the suction surface of impeller blade and causes different shaft power.

Design Optimization Of A Mixed Flow Waterjet Pump For Performance Improvement Involving Cavitation

Cavitating Flow Analysis and Design Optimization for a Waterjet Mixed Flow Pump

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Design Method of Water Jet Pump Towards High Cavitation Performances

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Multi-Point Optimization on the Diffuser of an Axial Flow Pump

Multi-objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm

The Optimization of A Low Specific Speed Pipeline Pump

Multi-objective Optimization of the Flush-Type Intake Duct for a Waterjet Propulsion System

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

Anti-Cavitation Design of the Symmetric Leading-Edge Shape of Mixed-Flow Pump Impeller Blades

Hydrodynamic optimization of the impeller and diffuser vane of an axial-flow pump

Multi-objective optimization design of the intake duct for a waterjet system

Multi-parameter Optimization Design, Numerical Simulation and Performance Test of Mixed-Flow Pump Impeller

Design of Contra-Rotating Waterjet Pump Based on High Cavitation Performances

Research on hydraulic optimization design method of water-jet propulsion pump considering hump index

Multi-objective optimization of a high efficiency and suction performance for mixed-flow pump impeller

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Optimization Design for an Impeller of the Multiphase Rotodynamic Pump Handling Gas-Liquid Two-Phase Flow

Optimization for Cavitation Inception Performance of Pump-Turbine in Pump Mode Based on Genetic Algorithm

Many-Objective Hybrid Optimization Method for Impeller Profile Design of Low Specific Speed Centrifugal Pump in District Energy Systems