Abstract:A design method for an ultra-wideband coplanar-stripline-based vertical transition that can be used for ultra-high-speed digital interfaces is proposed. A conventional via structure, based on a differential line (DL), inherently possesses performance limitations (<10 GHz) due to difficulties in maintaining constant line impedance and smooth electric field transformation, in addition to the effects of signal skews, FR4 fiber weave, and unbalanced EM interferences. DL-based digital interfaces may not meet the demands of ultra-high-speed digital data transmission required for the upcoming 6G communications. The use of a coplanar stripline (CPS), a type of planar balanced line (BL), for the vertical transition, along with the ultra-wideband DL-to-CPS transition, mostly removes the inherent and unfavorable issues of the DL and enables ultra-high-speed digital data transmission. The design process of the transition is simplified using the analytical design formulas, derived using the conformal mapping method, of the transition. The characteristic line impedances of the transition are calculated and found to be in close agreement with the results obtained from EM simulations. Utilizing these results, the CPS-based vertical transition, maintaining the characteristic line impedance of 100 Ω, is designed and fabricated. The measured results confirm its ultra-wideband characteristics, with a maximum of 1.6 dB insertion loss and more than 10 dB return loss in the frequency range of DC to 30 GHz. Therefore, the proposed CPS-based vertical transition offers a significantly wider frequency bandwidth, i.e., more than three times that of conventional DL-based via structures.

Ultra-Wideband Common-Mode Rejection Structure with Autonomous Phase Balancing for Ultra-High-Speed Digital Transmission

An Analysis and Implementation of Common Mode Feedback in High-Speed Fully Differential Op-Amp

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

A Wideband 6-Bit Phase Shifter with Low RMS Error in 65nm CMOS Technology

Design of a Novel Ultra-Wideband Common-Mode Filter Using a Magnified Coupled Defected Ground Structure

An Ultra Broadband Passive Vector Modulator Phase Shifter

Ultra-Wideband Vertical Transition in Coplanar Stripline for Ultra-High-Speed Digital Interfaces

Modeling And Measurement Of A Common-Mode Filter Based On The 3-D Transmission Line Structure

A Compact Meander Line-Resonator Hybrid Structure for Wideband Common-Mode Suppression

An Asymmetric Spiral-Shaped Dgs Optimized by Genetic Algorithm for Wideband Common-Mode Suppression

An Alternating High‐low Impedance Common‐mode Filter for Differential Striplines

A Novel Coplanar Common-Mode Filter with A Wide Stopband

A Compact Broadband Common-Mode Suppression Filter That Integrates Series-Mushroom into Defected Corrugated Reference Plane Structures

A novel wideband common-mode suppression filter for differential signal transmission

An Ultra-Wideband Common-Mode Noise Filter for Differential Signals Using Compact Patterned Ground Structure

A Novel Compact Dual-Functional Circuit With Differential-Mode Equalization and Broadband Common-Mode Suppression Using Patterned Ground Plane

A U-shaped Complementary Open Loop Defective Ground Structure with Slow Wave Structure for Mode Conversion and Common Mode Noise Suppression

An Advanced Broadband Absorptive Balun for Modern Communication Systems

A Compact Common-Mode Suppression Filter for Differential Signal Transmission with Slow-Wave Structure

A Common-Mode Filter Design Using Superconducting Composite Right-/Left-Handed Resonators

A Common-Mode Noise Suppression Filter for Gigahertz Differential Signals Based on Substrate Integrated Waveguide Resonators