Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

Contact engineering for temperature stability improvement of Bi-contacted MoS2 field effect transistors

Fundamental Understanding of Interface Chemistry and Electrical Contact Properties of Bi and MoS2

Transport Properties Of Moo3 Contacted Few-Layer Mos2 N-Type Field-Effect Transistor

Transport Properties of MoO&lt;sub&gt;3&lt;/sub&gt; Contacted Few-Layer MoS&lt;sub&gt;2&lt;/sub&gt; N-type Field-Effect Transistor

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

Pervasive Ohmic Contacts in Bilayer Bi2O2Se–Metal Interfaces

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Contact Resistance Optimization in MoS${_2}$ Field-Effect Transistors through Reverse Sputtering-Induced Structural Modifications

Contact Optimisation Strategy for Wafer-Scale Field-Effect Transistors Based on Two-Dimensional Semiconductors

Improved Thermal Dissipation in a MoS 2 Field-Effect Transistor by Hybrid High- k Dielectric Layers

A "click" Reaction to Engineer MoS2 Field-Effect Transistors with Low Contact Resistance.

Performance and stability improvement of CVD monolayer MoS2 transistors through HfO2 dielectrics engineering

The Optimization of Contact Interface Between Metal/mos2 FETs by Oxygen Plasma Treatment

Monolayer MoS2-based Transistors with Low Contact Resistance by Inserting Ultrathin Al2O3 Interfacial Layer

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

Approaching Ohmic Contacts for Ideal Monolayer MoS2 Transistors Through Sulfur-Vacancy Engineering

ZrTe2 Compound Dirac Semimetal Contacts for High-Performance MoS2 Transistors.

Bi-MoSe 2 Contacts in the Ultraclean Limit: Closing the Theory-Experiment Loop

Thermal Stability of Titanium Contacts to MoS2

Reducing contact resistance of MoS2-based field effect transistors through uniform interlayer insertion via atomic layer deposition

Enhanced Electrical Properties of Lithography-Free Fabricated MoS<sub>2</sub> Field Effect Transistors with Chromium Contacts