Abstract:Semiconductor technology has known an exponential evolution in the last decades and is fully integrated in our everyday life. According to the Semiconductor Industry association (SIA) the global semiconductor industry sales reaches about US$ 700 billion in 2023, corresponding with a shipment of more than 1.2 trillion components. This necessitates implementation of many novel materials, advanced design concepts and new transistor structures. Increased device performance and reduced power consumption, while maintaining a good manufacturability and yield performance without penalizing the cost/function, are driving microelectronic research towards 3-nm technologies. A large variety of device architectures such as FinFETs, TFETs, negative capacitance, Gate-All-Around, nanowires (NWs), nanosheets (NSs) in both horizontal or vertical configurations, CFET and Forksheet structures are extensively investigated for both logic and analog/RF building blocks enabling System-on-Chip (SoC) applications. In addition to the huge progress achieved in silicon technology, heterogenous integration of Ge and III-V technologies on a silicon platform shows a strong potential, leading towards the on-chip integration of building blocks with different functionality. The fact that both Ge and III-V materials can be selectively grown on Si has strongly triggered the interest in heterogeneous integration. Wide bandgap materials such as GaN offer unique features for RF applications used in base stations for mobile communication, complementing the performance of Si devices suffering from limited output power. These materials can epitaxially be grown on Si substrates. One of the main challenges related to the hetero epitaxy of III-V materials on a Si substrate is the control of extended defects due to the lattice mismatch of the different materials. In recent years, there has been a strong increase in the commercial availability of GaN devices, although for certain applications there is a competition with SiC. Complex and dense SoC applications can be realized by 3D wafer stacking using Through-Silicon-Vias (TSV) for wafer-to-wafer bonding. The 3D integration results in a reduction of the RC product and interconnect length, a smaller form factor and enables vertical partitioning. Main challenges are the TSV process module itself (e.g. Cu via filling, mechanical stress, contamination, keep-out-zone), the wafer thinning and handling and the 3D stacking technology (stacking density, pitch, chip-to-chip interconnect etc.). Very promising results are obtained for monolithic sequential 3D (S3D) processing based on the processing of different tiers on top of each other. Difference can be made between transistor level (n- and pMOS), CMOS level (different standard cells in different tiers) and IP block level for the partitioning. In this way it is e.g. possible to process first CMOS circuits in the Si substrate and then further processing in a III-V layer on top. Benefits are related to an enhanced device density per chip area and a shorter interconnection length. A low cost less scalable tier can be processed on top of an expensive scalable tier as done in the case of logic-memory integration. Major trends in above mentioned process integration approaches are reviewed and technological challenges of some process modules and device structures highlighted.

Intel Hopes to Leapfrog Its Competitors: The chipmaker bets on new transistors, power-delivery tech, and a nascent foundry business

The Era of GAAFET Is About to Come

Is 3D chip technology the next growth engine for performance improvement?

Sapphire Rapids: The Next-Generation Intel Xeon Scalable Processor

Business Model Innovation in China's Semiconductor Industry: A Pathway to Technological Breakthrough*

From MOSFET to FinFET to GAAFET: The evolution, challenges, and future prospects

Elemental Design Base of Chinese Supercomputer Technologies

Xuantie-910: A Commercial Multi-Core 12-Stage Pipeline Out-of-Order 64-Bit High Performance RISC-V Processor with Vector Extension : Industrial Product

Defending Taiwan with Chips and Drones: Taiwan Doubles Down on its Silicon Shield Strategy while the U.S. Promises a Storm of Drones

The Moore's Law Machine: The Next Trick to Tinier Transistors is High-Numerical-Aperture EUV Lithography

Enabling High-Performance Heterogeneous Integration via Interface Standards, IP Reuse, and Modular Design

(Keynote) Technological Challenges and Emerging Device Architectures for Future Semiconductor Micro and Nanoelectronics

Spin-Based Computing: Device Concepts, Current Status, and a Case Study on a High-Performance Microprocessor

Innovating at Speed and at Scale: A Next Generation Infrastructure for Accelerating Semiconductor Technologies

New structure transistors for advanced technology node CMOS ICs

Semiconductors: Will the U.S. CHIPS Act Speed the Lab-to-Fab Transition?: A Semiconductor Startup's Journey Shows How It Could Work

The chips are down for Moore’s law

Top Picks Ignite Innovation

Split-Chip Design to Prevent IP Reverse Engineering

A Novel Energy-Efficient Salicide-Enhanced Tunnel Device Technology Based on 300mm Foundry Platform Towards AIoT Applications

Apparate: Evading Memory Hierarchy with GodSpeed Wireless-on-Chip