Abstract:Boronized alloys with high surface hardness has been revealed advance in enhancing the anti-wear performance of critical mechanic components. However, its application in industrial production is greatly limited due to the poor mechanical properties with crystallographic orientated brittle borides. In the present study, we demonstrated that high ductility and high strength were achieved for the boronized AlCoCrFeNi 2.1 eutectic high entropy alloy (EHEA) with the formation of nano-sized borides. The AlCoCrFeNi 2.1 EHEA was treated with electrochemical boronizing method, and its phase formation was studied by x-ray diffraction (XRD), electron back-scattered diffraction (EBSD) and focused ion beam-transmission electron microscope (FIB-TEM). Results show that the nano-grained of FeB, NiB and Cr 3 B 4 with size of about 135.5 nm were formed on the boronized layer with non-preferred crystallographic orientation of the phase. The surface hardness of boronized AlCoCrFeNi2.1 EHEA reached to about 18 GPa, being about 4 times higher than that of the original alloy. Further investigation by tensile testing shows that the tensile strength of boronized samples is about 1.2 GPa with a respectable ductility of about 16.04% ( ± 0.49) tensile ductility to failure. Meanwhile, extension test and digital image correlation (XTDIC) test shows that the boronized layer failed when the tensile ductility is about 5.1%. The disordered nano-grained in the boronized layer benefit in preventing the formation and propagation of cracks, which improved the ductility of the boronized AlCoCrFeNi 2.1 EHEAs.

A remarkable toughening high-entropy-alloy wire with a bionic bamboo fiber heterogeneous structure

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

High strength and ductility in a dual-phase hetero-structured AlCoCrFeNi2.1 eutectic high-entropy alloy by powder metallurgy

Nature-Inspired Hierarchical Steels.

The cobalt-free Fe35Mn15Cr15Ni25Al10 high-entropy alloy with multiscale particles for excellent strength-ductility synergy

B2-strengthened Al-Co-Cr-Fe-Ni high entropy alloy with high ductility

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Enhancing strength and ductility in heterolamellar medium-Mn steel through bamboo-like microstructure design

Improving strength-ductility balance of a brittle Al-doped FeCrNi multi-principal element alloy by introducing a heterostructure with hard phase enveloping soft phase

Enhanced strength-ductility synergy in a brittle CoCrNi2(V3B2Si)0.2 eutectic high-entropy alloy by spheroidized M3B2 and recrystallized FCC

Realizing superior strength-ductility combination in dual-phase AlFeCoNiV high-entropy alloy through composition and microstructure design

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Improving mechanical properties of an FCC high-entropy alloy by γ′ and B2 precipitates strengthening

Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling

Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys

Revealing the nano-grained microstructure and mechanical properties of electrochemical boronized AlCoCrFeNi 2.1 eutectic high entropy alloy

Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy

High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure

Boron microalloying for high-temperature eutectic high-entropy alloys

Achieving exceptional strength-ductility combination in a novel L1 2 nanoparticles-strengthened high-entropy alloy via conventional casting