Abstract:The plasma polymerization of ethanol monomer was carried out under the capacitively coupled radio frequency plasma (CCP) of a radio frequency (RF) power of 100W at different power to flow rate (P/F) ratios of 0.7, 1.0 and 2.7W/sccm. The influence of the P/F ratios on deposition rate, chemical composition, surface morphology, and wettability were studied for the plasma polymer films of ethanol monomer on the pristine low density polyethylene (LDPE) surfaces and the surfaces under the oxygen CCP pretreatment of a RF power of 200W for an exposure time of 1 and 5min. The deposition rate of the plasma polymer films gradually increased with the P/F ratios. The retention of the hydroxyl groups decreased and the contents of the ketone, carboxylic acid, ester, ether, and epoxide groups increased in the plasma polymer films with the increased P/F ratios. The conformal deposition of the plasma polymer films to the LDPE surfaces was found on the pristine surfaces with the sub-micrometer asperities and the surfaces under oxygen CCP pretreatment with the nanotextures. The dynamic contact angle of the plasma polymer films increased with the P/F ratios on the LDPE surfaces with the sub-micrometer asperities. The plasma polymer films showed the decrease of the dynamic contact angle with the P/F ratios on the surfaces with the nanonodules and the nanopillar array. The significant improvement of the adhesion was achieved for LDPE samples with the nanonodules and the nanopillar array under the surface modification of the oxygen CCP pretreatment followed by the deposition of the plasma polymer films of ethanol monomer due to the cooperation adhesion mechanisms of the mechanical interlocking and the chemical bonding.

Effects of Components of Plasma on Hydrophilicity Surface Modification of PET Film

Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma

Study on Hydrophilicity of Polymer Surfaces Improved by Plasma Treatment

Study on Surface Modification of Polyethylene Terephthalate(Pet) Film by Rf-Ar/O-2 Plasma Treatment

Surface Modification on Polyethylene Terephthalate Films with 2-Methacryloyloxyethyl Phosphorylcholine.

Controllable Wettability of Poly(Ethylene Terephthlate) Film Modified by Oxygen Combined Inductively and Capacitively Coupled Radio-Frequency Plasma

Study on Surface Modification of PET Film by Low Temperature Oxygen Plasma Treatment

Wettability of Poly(Ethylene Terephthalate) Film Treated with Low-Temperature Plasma and Their Surface Analysis by Esca

Study on Surface Modification of Polyethylene Terephthalate(PET) Film by RF-Ar/O<sub>2</sub> Plasma Treatment

Investigation of the Surface Structures and Dynamics of Polyethylene Terephthalate (pet) Modified by Fluorocarbon Plasmas

Investigation on the surface dynamics of PET treated by CF4 and CF4/CH4 plasmas. I. - By static contact angle and angle-dependent XPS techniques

Adhesive Properties of Polypropylene (PP) and Polyethylene Terephthalate (PET) Film Surfaces Treated by DC Glow Discharge Plasma

Surface Modification of PET Films Using Pulsed AC Plasma Polymerisation Aimed at Preventing Protein Adsorption

Study on the surface modification of polymer films by plasma

Investigation of the surface dynamics of PET treated by CF4/CH4 plasmas: IV. Application of static state, dynamic contact angle and angle-dependent XPS methods

Gas Barrier Properties of Amorphous Hydrogenated Carbon Films by Plasma -Enhanced CVD

CHANGES IN SURFACE PROPERTIES OF POLY (ETHYLENE TEREPHTHALATE) TREATED WITH LOW TEMPERATURE PLASMA: EFFECT OF PRETREATMENT WITH DIMETHYLFORMAMIDE

Effect of Cold Plasma Treatment on Surface of Properties PET Fibers

Surface Wettability and Antibacterial Effect of PET Film Treated with Oxygen Plasma Ion Implantation

Surface modification of poly(ethylene terephthalate) (PET) by magnet enhanced dielectric barrier discharge air plasma

Adhesion Enhancement of Polyethylene Modified by Capacitively Coupled Radio Frequency Plasma Polymerization of Ethanol