Abstract:Fractured rocks as typical engineering materials are commonly exposed to temperatures and dynamic perturbations. In this paper, constant amplitude low cycle (CALC) impact tests were carried out on red sandstone containing a single fissure (0°, 30°, 60° and 90°) after thermal treatment (25°C, 200°C, 400°C, 600°C and 800°C) utilizing a modified split Hopkinson pressure bar (SHPB). Subsequently, the fracture surfaces of the failure specimens were digitally reconstructed based on point cloud data captured by a three-dimensional (3D) laser scanning. And scanning electron microscopy (SEM) was also employed as a complementary tool to study the fracture micromorphology. The fractal and rough features of fracture surfaces based on the box-counting method and image segmentation method were investigated, respectively. Meanwhile, four second-order statistics in the grayscale co-occurrence matrix (GLCM) of the digitized fracture surface after grayscale processing were calculated to describe the fracture surface texture. The best-fit multiple regression models between the fracture surface feature parameters and the interaction of temperatures and fissure angles were constructed and analyzed. Moreover, the relationships between the fracture surface features and the mechanical parameters as well as the intrinsic mechanisms were analyzed and discussed in detail. The results demonstrate that the fractal dimension (Dc), joint roughness coefficient (JRC), maximum elevation difference (M D ), roughness characterization factor (ω), and GLCM second-order statistics possess specific response patterns to the temperatures and fissure angles. Whether the sensitivity in portraying the fracture surface features to the interaction of temperatures and fissure angles or the reliability of the best-fit multiple regression models, the shadow method based on image segmentation behaves more promisingly. Furthermore, conspicuous correlations can be found between both the feature parameters including the GLCM second-order statistics and the failure strength, strain rate as well as life. The high temperature activates thermal activation mechanisms that alter the potential crack sources and pathways in the grain and rock skeleton, affecting the microscopic fracture face morphology. Finally, the maximum tensile stress at the edge of the prefabricated fissure might be responsible for the angle effect exhibited by the feature parameters.

Fractal Characterization of the Fracture Surface of Untempered and Tempered Bainitic Modified 9Cr-1Mo Steel

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

Cracking in a Fe–25Mn–3Si–3Al Steel

Fractal of tensile fracture morphology of 5083 aluminum alloy sheet and its relationship with tensile properties

Characterization and Control of the Compromise Between Tensile Properties and Fracture Toughness in a Quenched and Partitioned Steel

Microstructures and Tensile Properties of 9Cr-F/M Steel at Elevated Temperatures

Other Aspects of the Impact Fracture Toughness-Microstructure Relationship in Nano-bainitic Steels

Experimental and Theoretical Investigation of Size Effects on the Ductile/Brittle Fracture Toughness of A Pressure Steel

Assessment of tensile deformation and fracture toughness behavior of 10Cr steel at ambient and high temperatures

Investigation of Residual Stress Effect on Cleavage Fracture Toughness in the Transition Temperature Region by Considering the Crack-Tip Constraint

Microstructure and property evolution during tempering of a medium carbon bainitic steel

The fatigue properties, microstructural evolution and crack behaviors of low-carbon carbide-free bainitic steel during low-cycle fatigue

Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements modification

Fracture Mechanical Properties and Fractal Analysis of Fracture Surfaces of Cortical Bone

The Significance of Coherent Transformation on Grain Refinement and Consequent Enhancement in Toughness

Temperature-Dependent Deformation and Fracture Properties of Low-Carbon Martensitic Steel in Different Stress States

Experimental investigation on the fracture surface features of heat-treated red sandstone containing fissure under constant amplitude low cycle impact using 3D digital reconstruction

Effect of martensite-austenite island decomposition during two-step tempering on the fracture surface morphology of impact and tensile tested Mn-Ni-Mo steel

Fatigue Fracture Behavior of High Strength Cr-Mo-V Steel

ON THE TIME-DEPENDENT MATERIAL FRACTURE TOUGHNESS AT HIGH TEMPERATURE