Abstract:Battery grade Li2CO3 is successfully synthesized by the carbonation‐decomposition method using defective crude Li2CO3 with the purity of 98.56 wt%. The research of reaction kinetics shows that the rate‐determining step of the carbonation and decomposition process is diffusion control and the generated HCO3− ions can resist the further dissolution of CO2. SO42− impurity comes from absorbed Na2SO4 and doped Li2SO4. Battery grade Li2CO3 is successfully synthesized by the carbonation‐decomposition method using defective crude Li2CO3 with the purity of 98.56 wt% containing 5873 ppm SO42− and other impurities such as Na, K, Ca, Fe, and Mg. Filter operation is found to be very important to improve quality of products. The purified Li2CO3 precipitation acquired by filtering the LiHCO3 solution possesses a higher purity of 99.65 wt% and greater whiteness with lower amounts of SO42− (222.0 ppm) and Fe (6.6 ppm). For further purification, ethylenediaminetetraacetic acid disodium salt is added into the LiHCO3 solution then Ca and Fe contents in purified Li2CO3 are reduced to 2.9 and 0.7 ppm, respectively. The removal efficiencies obtained for Ca, Fe, and SO42− are of 80.05%, 99.4%, and 97.5%, respectively. The research of reaction kinetics shows that the rate‐determining step of the carbonation process is diffusion control and the generated HCO3− ions can resist the further dissolution of CO2. The theoretical thermal decomposition temperature is 277.10 K by the thermodynamic calculation. SO42− impurity comes from absorbed Na2SO4 and doped Li2SO4. This work is of great significance to economically and simply treat defective product with high impurity content in the actual Li2CO3 production process.

Microbubble-assisted pressure carbonation for preparation of high purity lithium carbonate

Process intensification for the synthesis and purification of battery-grade Li 2 CO 3 with microfluidics

Preparation of Battery Grade Li2CO3 from Defective Product by the Carbonation‐Decomposition Method

Preparation of Battery-Grade Lithium Carbonate with Lithium-Containing Desorption Solution

Toward CO2 Utilization: Gas–liquid Reactive Crystallization of Lithium Carbonate in Concentrated KOH Solution

Preparation of Lithium Carbonate from a Li-bearing Desorption Solution

Mechanochemistry synthesis of high purity lithium carbonate

Preparation of battery-grade Li2CO3 efficiently by high shear dispersion at low temperature

Selective Recovery of Battery-Grade Li2CO3 from Spent NCM Cathode Materials Using a One-Step Method of CO2 Carbonation Recovery Without Acids or Bases

Preparation method for lithium silicate CO2 adsorbent

Discussion on Methods for the Preparation for High-purity Lithium Carbonate

Preparation of Li2CO3 Nanoparticles by Carbonation Reaction Using a Microfiltration Membrane Dispersion Microreactor

A Comprehensive Membrane Process for Preparing Lithium Carbonate from High Mg/Li Brine

Producing battery grade lithium carbonate from salt‐lake brine via bipolar membrane carbon dioxide mineralization

Preparation of Lithium Carbonate from Spodumene by a Sodium Carbonate Autoclave Process

Fabrication of Lithium Silicate-Based Sorbents from Sediment Treated by Citric Acid with Enhanced Co2 Sorption Property

Method for producing highly-pure battery grade lithium carbonate by using lithium sulfate solution

Extraction Of LiCl From Low-Purity Chlorides Through Solid Electrolyte Towards High-Purity Li2CO3 Production

Study on Preparation of Lithium Carbonate Via Reactive Crystallization from Old Salt Brine

Preparation of Li2CO3 by Gas‐liquid Reactive Crystallization of LiOH and CO2

Carbonated Beverage Chemistry for High‐Voltage Battery Cathodes